Diodes Incorporated has announced further additions to its extensive range of programmable multi-channel linear ReDrivers, releasing three new 20Gbps devices with 1.8V voltage ratings addressing fast-growing USB4 Gen3, Thunderbolt 4.0, and DisplayPort 2.0 standards. The DIODES ReDrivers PI2DPX2020, PI2DPX2023, and PI2DPX2063 are targeted at use in laptops, desktop PCs, workstations, active cables, monitors, and docking applications. Their […]
Consumer electronics
UVC emitting diodes offered in ceramic- and quartz-based packages
Vishay Intertechnology, Inc. introduced two new UVC (short wavelength ultraviolet) emitting diodes in a ceramic / quartz-based package for sterilization in medical, industrial, and consumer applications. Compared to previous-generation solutions, the Vishay Semiconductors VLMU35CR40-275-120 and VLMU35CR41-275-120 deliver higher radiant power at a lower cost while offering higher disinfection efficiency and longer service life. The devices […]
Cooling fans feature quiet operation
Cooler Master launches the Mobius Series, the new line of fans designed with innovation and performance in mind. Optimized with enhancements of interconnecting fan blades to fine-tuned sound output, the Mobius Series is engineered with the perfect balance of quiet operation and unmatched cooling capabilities, perfect for enthusiasts and advanced users. The Ring Blade Design […]
GaN half-bridge power ICs enable megahertz-range switching frequencies
Navitas Semiconductor announced the industry’s first GaNSense half-bridge power ICs. These half-bridge ICs enable a new level of MHz switching frequencies while dramatically reducing the system cost and complexity compared to existing discrete solutions. GaNSense half-bridge power ICs integrate two GaN FETs with drive, control, sensing, autonomous protection, and level-shift isolation, to create a fundamental […]
USB Type-C connector protection IC provides OVP, ESD protection
Halo Microelectronics announced the release of its HL8261, a 4-channel USB Type-C port protector for all computing, docking, and adapter essentials. In today’s applications, Sideband Use (SBU) channels can carry high-speed data, which makes protecting the SBU pins from electrostatic discharge (ESD) damage more challenging because the mechanism used to shield the pins adds capacitance […]
Signal transformers for BMSs sport high isolation, working voltages
With WE-BMS, Würth Elektronik presents signal transformers for battery management systems which, thanks to their galvanic isolation of 4300 VDC/1 min and high operating voltage of up to 1000 VDC, are ideal for use in energy storage systems, E-bikes, or E-scooters. Besides the transformers, the new WE-BMS series components also include at least one common-mode choke […]
Li battery charger IC features programmable charge parameters
Halo Microelectronics announced the release of its HL7090, a fully automatic and highly integrated lithium battery charging management IC with one switching charger, two linear chargers, and full-range programmable charge parameters through an I2C compatible interface. The HL7090 is a compact, flexible, and high-efficiency switching-mode charge management IC for single-cell Li-ion and Li-polymer batteries used […]
Turnkey GaN 140-W charger reference design covers USB PD3.1, single port type-c
GaN Systems announced the availability of a new turnkey 140W AC/DC charger reference design with USB PD3.1, Single Port Type-C Output. Compared to silicon-based chargers, this design is 40% lighter and 50% smaller, featuring an ultra-high-power density of 23W/in3. This design enhances GaN Systems’ portfolio (65W, 100W, 140W, 250W) of turnkey charger solutions for the consumer electronics market, […]
100-V, 35-A IC chipset targets 48-V DC-DC conversion tasks
EPC announces the introduction of a 100 V, 35 A integrated circuit designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones. The EPC23102 eGaN IC is capable of a maximum withstand voltage of 100 V, delivering up to 35 A load […]
Ultra-low-current detect switches optimized for battery powered devices
C&K has extended its detect product family to include an ultra-low current version. The SDS ULC (Ultra-low Current) detect switch series is designed to limit power consumption on battery-powered devices. With the proliferation of wireless and portable battery-powered devices, designers require solutions that consume minimal energy to prolong battery life. Combining low current (10µA) with […]
