Nexperia introduced the NXF6501-Q100, NXF6505A-Q100, and NXF6505B-Q100. These are AEC-Q100 qualified, push-pull transformer drivers that enable the design of small, low-noise, and low-EMI isolated power supplies for a range of automotive applications like traction inverters and motor control, DC-DC converters, battery management systems and on-board chargers in electric vehicles (EV). These transformer drivers are also […]
Industrial
30 V MOSFET reduces on resistance by 40%
Infineon Technologies AG has introduced its new StrongIRFET 2 power MOSFET 30 V portfolio, expanding the existing StrongIRFET 2 family to address the growing demand for 30 V solutions in the mass market segment. Optimized for high robustness and ease of use, the new power MOSFETs were specifically designed to meet the requirements of a […]
Power supply offered in 85 – 265 V AC single-phase input option
TDK Corporation introduces the HWS3000 programmable AC-DC power supplies in the TDK-Lambda series. These units deliver up to 3000 watts in a 270 x 150 x 61mm case size. The HWS3000 offers programmable output voltages of 24V, 48V, 60V, or 130V, with the ability to adjust from zero to maximum rating. Engineers can choose between […]
5 A MOSFET gate drivers spin motors and drive power supplies
Littelfuse, Inc. announces the launch of the IX4341 and IX4342 dual 5 ampere low-side MOSFET gate drivers. These gate drivers are specifically designed for driving MOSFETs and complete the existing IX434x driver series by adding the remaining two logic input versions. The IX434x series now consists of dual non-inverting, dual inverting, and non-inverting and inverting input […]
SMT bidirectional TVS diode protects to 240 V, 1 kA
Bourns, Inc. further demonstrates its innovation and technology leadership with the introduction of the industry’s first 240 V/1 kA Bidirectional Power TVS (PTVS) Diode that offers the highest power density available in a surface mount package. The Bourns Model PTVS1-240C-M PTVS Diode is designed with advanced silicon processing technology that yields exceptionally high voltage-handling capabilities, and along with […]
Power modules boost solar inverter output from 300kW to 350kW
onsemi has introduced its latest generation of silicon and silicon carbide hybrid Power Integrated Modules (PIMs) in the F5BP package, designed to enhance the power output of utility-scale solar string inverters and energy storage system (ESS) applications. These new modules deliver increased power density and efficiency within the same footprint as their predecessors, allowing a […]
12 V to 48 V models added to medical and industrial power supply line
TDK Corporation announces additional output voltage models to the 250W rated TDK-Lambda brand CUS250M series of power supplies in the industry standard 2” x 4” footprint. The full range now covers 12V, 15V, 18V, 24V, 28V, 36V, and 48V and is certified to the IEC 62368-1 and IEC 60601-1 safety standards for industrial and medical […]
0201-size, automotive-grade resistors bring enhanced reliability in consumer and industrial applications
Many types of electronic devices now benefit from the higher reliability of automotive grade resistors. By specifying automotive grade resistors, design engineers in any market segment can increase electrical stability and environmental reliability without the significant increase in cost normally associated with established reliability resistors. Stackpole’s RMCA series is AEC Q200 qualified and provides excellent long-term reliability. The […]
Three-phase filter series designed for industrial an renewable energy use
The MF423-4-3D-BS Three Phase EMI Filter Series from EMIS is designed to effectively reduce electrical noise and ensure a clean power supply across various applications, including renewable energy systems and industrial machinery. This dual-stage EMI filter offers high attenuation for both line-to-ground and line-to-line emissions, enhancing system reliability and conducted immunity when connected to the […]
Power device line expanded to include ideal diodes with low forward voltage drop
Nexperia announced the addition of two new ideal diode ICs to its continuously growing portfolio of power devices. The NID5100 is suitable for standard industrial and consumer applications while the NID5100-Q100 has been qualified for use in automotive applications. Ideal diodes are MOSFET based devices that offer much lower forward voltage drop than traditional diodes […]
