Infineon Technologies AG has expanded its easy-to-design EiceDRIVER X3 Compact (1ED31xx) and the highly flexible EiceDRIVER X3 Enhanced Analog (1ED34xx) and Digital (1ED38xx) gate driver families. Both families now offer variants with superior reinforced isolation for higher application safety and long operating life. The new family members are VDE 0884-11 certified. With 8 mm wide-body […]
Evaluation boards
Motor control ICs control 3-phase BLDC motors in battery-powered devices
Renesas Electronics Corporation expanded its motor control solutions portfolio with two system-in-package (SiP) solutions to simplify brushless DC (BLDC) motor control design for a wide range of cordless battery-powered applications such as power tools, drones, water pumps, vacuums, cleaning robots, fans, and other systems. Combining multiple functions into a SiP solution, the new RAJ306001 and […]
Power management ICs handle Xilinx ZU+ MPSoC FPGAs
AnDAPT launched six new PMIC solutions for powering up multiple supply rails of Xilinx ZU+ MPSoC FPGAs family and Xilinx-defined used cases. Xilinx ZU+ MPSoC power architecture requires more than 25 power rails AnDAPT has worked closely with Xilinx on the designs which speed the development of power supplies for a variety of industrial and […]
Energy-meter eval board combines low-cost sensors and galvanic isolation
A new evaluation board from STMicroelectronics speeds design of 3-phase AC Watt meters that meet the most stringent international quality and accuracy standards using low-cost, electromagnetic-immune shunt sensors and advanced galvanic-isolation technology for superior reliability and robustness. The EVALSTPM-3PHISO evaluation board combines the high-accuracy STPMS2 metering front-end IC and the advanced STISO621 digital isolator, with customizable turn-key firmware […]
Flexible organic solar cells are optimized for indoor light spectrum
A small, thin and flexible light cell, printed on recyclable plastic, has been optimized for the light spectrum found indoors. Designed by Epishine in Sweden, the light cells are designed to be used instead of batteries on wireless sensors and similar devices. The cells have a power density of 18 μW/cm2 and have a 1 […]
eGaN demo board covers 48-V dc-dc conversion
EPC announces the availability of the EPC9148 and EPC9153 demonstration boards for 48 V DC-DC conversion. The EPC9153 is a 250 W, extremely thin, power module using a simple, low-cost synchronous buck configuration delivering a 98.2% peak efficiency with a maximum component height of 6.5 mm. The EPC9148 utilizes a multilevel topology enabling a maximum […]
SiC MOSFET inverter board helps evaluate servomotor drive designs
In power electronics, motor drives take up a major share in the market. With its CoolSiC MOSFET Modular Application Design Kit (MADK) boards Infineon Technologies AG helps in further shortening time to market in this relevant segment. As part of the MADK platform for motors of up to 7.5 kW, the evaluation board EVAL-M5-IMZ120R-SIC is […]
Evaluation board uses bridgeless totem-pole PFC topology with analog control
Transphorm, Inc. announced availability of its newest evaluation board, the TDTTP4000W065AN. Designed for single-phase AC-to-DC power conversion up to 4 kilowatts (kW), this board uses the bridgeless totem-pole power factor correction (PFC) topology with a traditional analog control. This pairing provides fast and easy access to the top-notch conversion efficiency made possible by Transphorm’s latest […]
Eval board carries 400-W Energy Star 6.1 supply circuit
STMicroelectronics’ EVL400W-EUPL7 evaluation board delivers a ready-to-use 400-Watt power-supply solution that meets today’s toughest eco-design norms. The board leverages innovative features of ST’s L4984D current-mode PFC controller and L6699 resonant half-bridge controller to maximize energy efficiency in multiple operating modes. Full-load efficiency is over 93% at 230VAC and over 91% at 110VAC, with no-load mains consumption of […]
Demo board provides 48-12-V dc-dc converter for high-density computing/data centers
EPC announces the availability of the EPC9143, a 300 W DC-DC voltage regulator in 16th brick size. The EPC9143 power module integrates Microchip’s dsPIC33CK digital signal controller (DSC) with the latest generation EPC2053 eGaN FETs from EPC to achieve 96% efficiency in a 48 V input to 12 V output conversion at 25 A. The […]