WAGO Corporation introduces its 2585 Series relays, which provide essential switching functions with nominal input voltages from 12 VDC to 230 VAC and configurations offering two or four changeover contacts. The series includes sockets, elementary relays, and preassembled kits suited for general industrial control applications requiring reliable, high-cycle mechanical operation.
Power Components
Hybrid polymer series gains 30 g design
TDK Corporation has expanded its B409x series of SMD hybrid polymer aluminum electrolytic capacitors with a vibration-resistant design rated to 30 g per MIL-STD-202, Method 204, achieved through four stabilizing posts on the base plate. The series offers voltage ratings from 25 V – 80 V, capacitance from 56–1100 µF, and low ESR with high ripple current […]
Dual-output 400 W module for configurable power supplies
Advanced Energy introduced a dual-output 24 V/24 V NeoPower 400 W module for its configurable NP power supplies, delivering up to 150 W per output in a 2.5-inch slot. The module enables up to 16 isolated outputs per supply and is certified to IEC/EN/UL 62368-1, IEC/EN 60601-1, and SEMI F47 for use in industrial, medical, semiconductor, and test […]
Mouser Electronics introduces online resource center for power management design
Mouser Electronics, Inc. has launched an online Power Management Resource Center designed to support engineers working on efficient power system design. As compact, high-performance, and battery-powered devices become more common, the need for effective power management continues to grow. The resource center examines current developments in the field, including the role of smart grid management […]
NTC inrush limiters for high-power supplies
TDK Corporation introduces the new S series inrush current limiters (ICLs), comprising the S30 (ordering code: B57130S0*M000) and S36 (B57136S0*M100) families of NTC thermistors. With maximum steady-state currents of up to 35 A and energy absorption capabilities of up to 750 J, the components are optimized for high-power applications that demand reliable suppression of inrush […]
150 A quad-channel IVR targets AI accelerator power rails
Endura Technologies has introduced the ET21324X, a quad-channel integrated voltage regulator intended for high-current point-of-load conversion in AI and high-performance compute platforms. The device is specified to deliver 150 A continuous output current with 220 A instantaneous capability and targets power rails that must hold regulation under rapid load steps from processors and accelerators. The […]
5.5 V, 4 A buck targets automotive point-of-load rails
Diodes Incorporated has introduced the AP61406Q, an automotive-qualified synchronous buck converter designed for point-of-load regulators in systems such as infotainment, instrument clusters, telematics modules, and advanced driver assistance systems. The device supports up to 4 A output current with a maximum input voltage of 5.5 V and is intended for compact, high-efficiency DC-DC conversion in […]
350 W open-frame supply targets industrial automation and robotics
Advanced Energy has introduced the SLB350, a 350 W open-frame AC-DC power supply designed for industrial equipment that requires compact packaging and compliance with emissions and safety standards. Target applications include stage lighting, test and measurement systems, automation equipment, robotics, and battery-charging platforms where power density and thermal margin affect enclosure design and system reliability. […]
Hybrid PV PMIC cold-starts at 275 mV, 5 µW
e-peas has introduced the AEM15820, an energy-harvesting power-management IC designed to interface with hybrid photovoltaic cells that operate across both indoor and outdoor lighting conditions. Hybrid PV sources can produce very low power under indoor illumination and scale to much higher levels in direct sunlight, creating a wide operating range that requires efficient conversion and […]
Radiation-hardened diodes qualified to 60 MeV·cm²/mg burnout
STMicroelectronics has introduced three radiation-hardened low-voltage rectifier diodes intended for power conversion and protection circuits used in Low Earth Orbit satellites. The LEO1N58xx devices are supplied in SOD128 plastic packages and are positioned for use in switched-mode power supplies and high-frequency DC-DC converter stages where low forward drop and fast recovery support efficiency and transient […]
