EPC announces the introduction of the EPC7019 radiation-hardened eGaN FET. The EPC7019, a 40 V, 1.5 mΩ, 530 APulsed, rad-hard eGaN FET in a small 13.9 mm2 footprint. The EPC7019 has a total dose rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm2). These devices are offered in a chip-scale package, […]
Power Management
Reference design covers automotive in-cabin wireless charging stations
Renesas Electronics Corporation released a next-generation customer reference design for automotive wireless charging stations. The new P9261-3C-CRBv2 provides industry-leading features that enable automotive manufacturers to quickly and efficiently deliver premium performance and safety features for in-cabin wireless charging. The P9261-3C-CRBv2 solution includes the automotive-qualified wireless power controller P9261 with MP-A13 3-coils reference design as the wireless […]
300-W ac/dc supplies handle industrial, automation, ITE apps
TRACO POWER announces their new TPI 300 series of 300W high-density AC/DC power supplies available in two packages, a conduction-cooled baseplate or fully enclosed with a fan. Designed for a wide range of OEM / Embedded and Industrial applications where long-term reliability is critical and space is limited. Features include: TPI 300L-M open-frame / baseplate […]
SMD zero-ohm jumpers handle over 70 A
Zero-ohm jumpers are widely used in all types of electronic circuits for a wide range of markets and end products. They make circuitry routing easier and simplify manufacturability. However, jumper requirements for higher current levels frequently exceed the capability of general-purpose jumpers, and even some jumpers are classified by the manufacturer as “high current.” Stackpole’s […]
Ultra thin, 3 m dielectric film for high-heat SiC inverter technology
SABIC will introduce at the 2022 Applied Power Electronics Conference (APEC) in booth #1718, a new, thinner gauge of its ELCRES HTV150A dielectric film which may be used for capacitors in the traction inverters, onboard chargers, and electrical compressors of hybrid, plug-in hybrid and battery electric vehicles (xEV). The 3-micron (µm) film is 40 percent […]
Power super-junction MOSFETs feature 100 m Ω, 140 m Ω on resistance
Alpha and Omega Semiconductor Limited announced the release of 600V 110mOhm and 140mOhm αMOS5 Super Junction MOSFETs in the DFN8x8 Package. αMOS5 is AOS’s latest generation of high voltage MOSFET, designed to meet the high efficiency and high-density needs for Quick Charger, Adapter, PC Power, Server, Industrial Power, Telecom, and Hyperscale Datacenter applications. Today’s Server […]
Automotive grade fuse first to carry 1 kVdc rating
Littelfuse, Inc. announced the new EV1K Series Fuses, the first Automotive Grade fuse with a rating of 1000 Vdc. They are designed and tested to meet the overcurrent circuit protection needs of the eMoblilty market, specifically Electric Vehicle (EV) applications. The EV1K provides overcurrent protection in EV high-voltage power supply applications, including: On-board chargers (OBCs); Battery […]
High-current shunt resistors offer a 5-W power rating
Modern electronics utilize current sense resistors for portable power management. As larger and more powerful devices become portable, higher currents and higher power ratings become critical, however, space for any portable electrical device must always be conserved. The HCSM2818 from Stackpole offers a 5-watt continuous power rating to maximize power handling in a given PCB […]
PMBus ac-dc modules add 504-W rated models
TDK Corporation announces the introduction of 12V and 48V output models to the conduction-cooled TDK-Lambda brand PFH500F series of AC-DC power modules. The power supplies are rated at 504W, feature a compact 4” x 2.4” footprint with programming and communication through a PMBus interface. These power supplies are ideal for a variety of applications including […]
Compact ac/dc supplies provide 300 W for industrial/medical uses
TRACO POWER announces their new TPP 300 series of 300W high-density AC/DC power supplies available in open frame or fan-enclosed packages for a wide range of Medical and Industrial applications where long-term reliability is critical and space is limited. Features include: TPP 300A-M open-frame models (2.00 x 4.00 x 1.26”); TPP 300-M enclosed with fan […]