Regulatory standards cover safety and electromagnetic compatibility (EMC), in addition to efficiency. Safety and EMC standards are relatively straightforward, and their numbers are limited. Efficiency is a different matter: Society’s drive to reduce greenhouse gas emissions results in increasingly sophisticated energy efficiency standards for all types of power converters. It started with relatively simple ENERGY […]
Single-phase
Gains from GaN
Energy efficiencies made possible by gallium-nitride semiconductors are starting to impact every day products. Paul Wiener • GaN Systems, Inc. | Ron Stull • CUI, Inc. Wide-bandgap power semiconductors are in production now and recommended for new designs. The earliest adopters among power supply OEMs have already begun introducing new product lines employing this technology […]
Identifying the right medical power supply
Special considerations apply for power supplies when even small electrical currents pose a shock hazard. Dermot Flynn, Chris Jones • Advanced Energy The consequences of leakage current came to the forefront in the 1970s, and since then technical standards for the safety and effectiveness of medical electrical equipment have evolved to become the most stringent […]
Sager Electronics to handle Vox Power VCCS300 conduction-cooled ac/dc supplies
The Vox Power VCCS300 series of conduction-cooled ac/dc power supplies are 300-W units producing continuous output power in just a 2x4x1.61-in package. The all-in-one solution can be cooled using conduction, convection, or forced air cooling techniques. The VCCS300 series is a candidate for power solutions in applications where high efficiency, rugged reliability, silent operation, and […]
Reference design based on 4-kW high-efficiency single-phase ac-dc evaluation board
A new power supply reference design enables engineers to identify and correct design errors before building hardware, thereby lowering product costs and speeding time to market. Switched-mode power supplies provide greater efficiency, increased power density and lower overall system costs when using GaN devices. However, GaN, a high switching speed, high performance wide bandgap semiconductor, […]
Picking reliable power supplies
A few basic parameters can be useful for selecting power supplies that must work dependably in specific application scenarios. Alex Karapetian Acopian Power Supplies Electronic devices require a reliable source that can supply power at all times. But power supplies are available in a wide range of voltage and current ratings. Engineers tasked with selecting […]
Bi-directional 22/25-kW liquid-cooled inverter battery charger targets EV, HEV apps
Bel Power Solutions announces the BCL25-700-8, a 22/25 kW bi-directional liquid-cooled on-board inverter battery charger with export functionalities for hybrid (HEV) or fully electric (EV) vehicles, as well as medium and heavy-duty on- and off-highway vehicles. The BCL25-700-8 is parallelable up to 4 units in charge mode, with typical efficiency up to 94%. With the […]
Single-phase 85-264-Vac input/28-Vdc output supply module meets SOSA standard
Aegis Power Systems, Inc. announces the new VPX1PH3UC310-SA, a single-phase 85-264Vac input to 28Vdc output power supply module with 310 watts and EMI filtering. This rugged slide-in power supply has been developed in alignment with the Sensor Open Systems Architecture (SOSA) technical standard for use in interoperable systems for sensor management. Using the latest in […]
GaN FET hermetica half bridge delivers 15 A
Solid State Devices, Inc. continues to expand its hermetic GaN Power FETs line with the SGF30E100Z8, a 1000 volt dual GaN FET. When used in a half-bridge configuration, this device delivers 15 amps of continuous drain current, but can also be connected in parallel to achieve 30 amps. Similar to SSDI’s other GaN offerings, the […]
Triple-isolated ac/dc industrial supplies output 300 W
Cosel Co, Ltd announced the expansion of its leading RB series, designed for mid-size robotics and factory automation, with the addition of a 300W version. The RBC300F is an open-frame, configurable AC/DC power supply with triple outputs tailored for robotic controllers and factory automation. Based on a unique concept, the Cosel RBC300F series offers three […]
