The QM8 modular power supplies are rated at 1,200 to 1,500 W. These models are available with up to 18 outputs, have full MoPPs (Means of Patient Protection) isolation and low acoustic noise. With medical and industrial safety certifications, the power supplies are suitable for use in medical, test and measurement, communications and broadcast equipment. […]
Single-phase
Conduction/convection cooled supplies only 31-mm high handle 206-W peak loading
The TDK-Lambda CUS200LD ac-dc power supply, rated at 120 W convection or 150 W conduction cooled, can deliver up to 206 W for up to 10 seconds to drive peak loads associated with dynamic LED displays. The product’s 31-mm height allows the product to be mounted inside low profile signage, or industrial equipment with limited […]
Medical / ITE certified 2×4-in. supplies work up to 85°C
The TDK-Lambda brand CUS150M series of ac-dc 150-W rated power supplies operate in ambient temperatures of up to 85°C without the need for forced air cooling. Certified to medical and ITE standards for Class I and II (no earth ground connection) operation, the product meets both curve B radiated and conducted emissions. CUS150M target applications […]
Robot controller power supply has EN62477-1 OVC III certification
The ZWS240RC-24 ac-dc power supply is rated at 240-W output power. This model is an addition to TDK-Lambda’s widely used long-life ZWS series of 10 to 300-W industrial power supplies. Certification to Over Voltage Category (OVC) III enables direct connection to the incoming ac distribution panel, saving the cost and space of an isolation transformer. […]
Class I/II 500-W configurable medical supplies work with low airflow, meet Curve B EMI specs
The XMS500 series of ac-dc power supplies are rated at 500 W output power and have a Class I and Class II (no earth ground connection) construction. The series conforms to curve B conducted and radiated emissions, with a 6-dB margin and has a low leakage current of less than 150 µA. The high operating […]
30/60-W medical Class I, II supplies meet Curve B radiated/conducted emissions
The CUS30M and CUS60M series of ac-dc power supplies, rated at 30 and 60-W output power, are certified to medical and ITE standards for Class I and II operation. The products meet both curve B radiated and conducted emissions without the need for additional filtering or shielding. The CUS30M and 60M target applications include medical, […]
Sager to stock 120-W single-output medical power supplies from SL Power
Sager Electronics is now stocking SL Power’s MB120S power supply series for medical applications. These 120 Watt AC/DC power supplies are feature-rich and highly efficient, easily fitting in a 1U chassis while providing 100 Watts of convection power. The MB120S Series from SL Power have a 10-year life design with premium e-caps, and are designed to […]
1 kW, 1.5 kW power supplies have medical safety certifications
The RWS1000B and RWS1500B “ME” RWS-B series medical ac-dc power supplies provide 1,000 W and 1,500 W power levels certified to the medical IEC 60601-1 standard. The seven-year warranty RWS-B series is a candidate for medical, cosmetic laser treatment and analysis equipment requiring less than 300 µA earth leakage current. The 1,000 W and 1,500 […]
Power quality analyzers monitor multiple 3-phase, single-phase loads
According to EPRI, power quality issues cost U.S. businesses between $120 and $180 billion each year. For the semiconductor industry, this is a huge problem. But with proper detection and reporting, potential PQ problems can be identified and addressed before they impact the bottom line. Power Standards Lab Inc. (PSL) announced the commercial availability of two new […]
Rack-mount hot-swap supplies available with LAN interface modules
LAN (Local Area Network) modules work with HFE series 1.6 kW and 2.5 kW rack mounted, hot swap power supplies. These optional modules allow remote monitoring, status check and programming through a number of standard protocols, supporting VISA (Virtual Instrument Software Architecture). The LAN option is suitable for computer networking, telecommunications, test and measurement and […]
