TDK Corporation announces the introduction of the high voltage output CHVM series of DC-DC converters. Capable of operating from a nominal 12V input, these non-isolated converters deliver output voltages ranging from 180V to 2,000V. Low output ripple and noise are achieved through the use of a metallic case that provides five-sided shielding to reduce radiated emissions. The CHVM has been designed for use in noise-sensitive applications, including photomultiplier tubes, photodiodes, scanning electron microscopes, X-ray fluorescence spectrometers, mass spectrometers, and ultrasonic probes.
The series comprises twenty parts, with positive or negative polarity output voltages of 180, 300, 350, 470, 1,000, 1,500, and 2,000V. The maximum output ripple and noise level are just 150mV and typical measurements are between 5 and 50mV. The output voltage can be adjusted over a 0.5% to 100% range through the use of an external voltage or resistor or inhibited using the remote on/off function. The input voltage is 11 to 13V for the 1.4W and 1.5W models, 10.8 to 16.5V for the 2W, and 10.8 to 13.2V for those rated 2.5W or higher.
The compact converters are available in three case sizes. The CHVM1R5 (1.4W and 1.5W) measures 44 x 16 x 30mm (WxLxH), the CHVM2 and CHVM2R6 (2W and 2.6W) 110 x 12 x 19.75mm and the CHVM2R5, CHVM2R7 and CHVM3 (2.5W, 2.7W and 3W) 80 x 12 x 19.75mm.
With a start-up temperature of -20 oC, the operating temperature range is -10 to +50oC for the 1.4 and 1.5W parts and -10 to +60oC, derating linearly to 60% load above +50oC, for the higher power models. All parts have over-current protection, are certified to IEC/UL/CSA/EN 62368-1 safety standards, and have the CE mark for the Low Voltage and RoHS Directives.
Leave a Reply
You must be logged in to post a comment.