Bourns, Inc. announced the availability of a new AEC-Q200 compliant series of thick film chip resistors. Bourns continues to take a leading role in introducing space-saving resistor products by offering its latest Model CRxxxxA series in eight compact form factors — from small 0201 (0603 Metric) up to 2512 (6431 Metric). The CRxxxxA series is part of […]
bournsinc
Shielded power inductor line features low resistance, high saturation current
Bourns, Inc. announced 11 new low resistance, high saturation current model series to its shielded power inductor line. Featuring a very low profile (less than 2 mm), the Bourns Model SRP0xxx series has a metal alloy powder core and flat wire construction that provides a range of benefits including low copper loss, DC resistance, and audible […]
Power inductors target high-current-density high-temp apps
Bourns, Inc. announced the addition of nine new series to its SRP series power inductor line. These new Model SRP inductor families are designed to meet high current and low radiation requirements in a small form factor. Bourns’ latest inductors feature a coil that is wound with either round or flat wire completely press-molded with an iron-based […]
Power transformers feature high clearance/creepage distance isolation
Bourns, Inc. introduced its new high clearance/creepage distance isolation power transformer series. Bourns Model HCT series high-voltage isolation push-pull transformers are AEC-Q200 compliant. Bourns designed its latest transformer series to support isolated interface power for CAN, RS-485, RS-422, RS-232, SPI, I2C, and lower-power LAN. Solutions that simplify isolated interface power are required in a broad range of […]
Flyback transformers handle IEEE 802.3 af-compliant PoE PD and PWM controller apps
Bourns, Inc. announced an addition to the company’s flyback power transformer line. Designed to support IEEE 802.3 af-compliant, integrated Power-over-Ethernet (PoE) Powered Device (PD) and Pulse Width Modulation (PWM) controller applications, Bourns Model SM13117EL provides DC/DC power conversion in isolated mode. The SM13117EL flyback transformer features 13 watts of output power, 36 – 72 VDC/ 250 kHz input, […]
TVS diodes optimized for dc bus clamping
Bourns, Inc.introduced its Model 15KPA-SD-Q transient voltage suppressor (TVS) diode series. Bourns designed its latest TVS diodes for use in DC bus clamping applications, and to protect sensitive electronics applications against overvoltage transients. In addition, these new protection devices are AEC-Q101- compliant making them ideal protection solutions for applications that require high reliability such as in power supplies and equipment […]
TVS diodes handle 600-W peak pulse power for high-density power supply apps
Bourns, Inc. announced the further expansion of its line of discrete transient voltage suppressor (TVS) diode products with two new series of ESD/EFT surge protection products. Bourns designed its Model SMA6J and Model SMA6L-Q TVS diodes to protect power buses and I/O interfaces in data lines and DC power supplies. In addition, Bourns Model SMA6J-Q is AEC-Q101 compliant and well-suited for […]
TVS diodes target data center surge protection apps
Bourns, Inc. introduced two new TVS diode surge protection series designed to meet the component miniaturization required in today’s highly integrated and high power density designs. Bourns Model SMF4L and Model SMF4L-Q Series are offered in a compact, low profile surface mount SOD-123FL package with a height of just 1.125 mm, which is 50 percent smaller than Bourns’ previous […]
Hybrid overvoltage protection devices replace standard MOVs
Bourns, Inc. introduced the company’s GMOV line of overvoltage protection components. Bourns’ innovative hybrid design combines its patented, space-saving Gas Discharge Tube (GDT) with FLAT technology with a Metal Oxide Varistor (MOV) to create a compact and enhanced overvoltage protector that is a drop-in replacement for standard 14 and 20 mm MOVs. Bourns designed its new GMOV […]
Power Electronics Top Talks in December on EDABoard.com forums
Peer-to-peer, engineer-to-engineer questions and answers from the EDABoard.com engineering community around power electronics. Click the “Read more” link and follow the entire conversation and maybe add your two cents by logging in to EDAboard.com Favorite low phase shift 240Vrms detector – I have a requirement for a very low phase shift, galvanically isolated, zero cross detector […]
