TDK-Lambda has released the CCGS series, a family of isolated 15 W and 30 W DC-DC converters in 52 × 93 × 23.5 mm chassis-mount and 52 × 93 × 31.9 mm DIN-rail packages, with 9-36 V or 18-76 V input ranges and single or dual outputs from 3.3 V to 15 V. Designed for […]
converters
SIP-8 isolated converters handle up to 75 V input
The TMR 8WI series from TRACO Power is a family of isolated DC/DC converters in a compact SIP-8 package supporting wide input ranges of 4.5–18 VDC, 9–36 VDC and 18–75 VDC with up to 89% efficiency. The converters provide 1500 VDC isolation, short-circuit protection, overcurrent limitation undervoltage lockout and remote on/off control, and are certified […]
30W 1 inch by 1 inch DC-DC Converters Have 4:1 Input Range from TDK-Lambda
June 2015 – Power Supply Product TDK Corporation announces the introduction of the TDK-Lambda 30W CCG30G series of DC-DC converters. Operating over a 4:1 input range, these highly efficient products are enclosed in a 1 inch by 1 inch six-sided shielded metal case. Applications include data-communications, tele-communications, process control, broadcast, battery powered and test and […]
Murata’s 100-to-120-W dc-dc converters for embedded computing
The UWE series is a 100-to-120-W, eighth-brick, DC-DC converter for embedded computing applications, instrumentation subsystems, and military embedded systems. The open frame isolated DOSA-compatible power electronics devices provide an efficiency of typically 91.5 percent, which requires no forced-air cooling in most applications. This series uses industry-standard through-hole package, and measures 2.3 x 0.9 x 0.39 […]
CUI Inc Expands Novum Product Line
CUI Inc announced the expansion of their Novum product line to now include a roadmap for high density intermediate bus converters based on their proprietary Solus Power Topology. Though final product details are not yet available, initial products in the lab are achieving power densities over 20% higher than leading intermediate bus converters currently on […]
