Diodes Incorporated has introduced the PI3EQX12902E/PI3EQX12904E to further strengthen its ReDriver product offering. These ReDrivers meet the Modern Standby mode requirements as outlined by Microsoft Corporation, and deliver elevated linearity and ultra-low jitter characteristics now expected in laptop, notebook, industrial PC, and embedded system designs. Operating from a 3.3V rail and in standby mode, the […]
diodesincorporated
Redriver helps extend PCB trace lines, minimizing power and BOM costs
Diodes Incorporated has announced a new addition to its extensive range of linear ReDriver ICs. The PI3UPI1608helps significantly extend PCB trace lengths, while minimizing power consumption and associated bill-of-materials costs. Supporting speeds of up to 20Gbps, this UPI 2.0 and PCIe 4.0 compliant device has eight differential channels. Its built-in coupling capacitors allow significant board […]
Three-channel linear LED drivers targets automotive rear lamp cluster design
Diodes Incorporated has expanded its portfolio of devices supporting automotive exterior illumination with the introduction of the AL5873Q three-channel linear LED driver targeted at simplifying rear lamp cluster designs. Rated for 125°C ambient temperature operation, this automotive-compliant, AEC-Q100 Grade 1 qualified device meets the demands of next-generation vehicle design – while also providing energy and space […]
Dual power rail I2C bus GPIO expanders are automotive-compliant
Diodes Incorporated has announced 16-bit PI4IOE5V6416Q and 34-bit PI4IOE5V6534Q bidirectional voltage-level translation general-purpose I/O (GPIO) expanders for automotive applications. Representing an industry first for the automotive industry, the automotive-compliant, AEC-Q100 Grade 2 qualified devices with dual voltage rail provide enhanced programmable I/O for next-generation low voltage microprocessors and microcontrollers via the I2C interface. As part of Diodes’ ongoing […]
Autosensing level shifter IC addresses lower voltage processors and MCUs in automotive systems
Diodes Incorporated has expanded its family of voltage-level shifters, with the release of the PI4ULS3V304AQ. This advanced level shifting technology, featuring high degrees of flexibility, is proving vital to modern automobile design. It addresses the challenge of lower voltage microprocessors and microcontrollers incorporated into automotive systems, which are required to drive external devices operating at […]
Integrated buck converters simply circuit design in automotive power systems
Diodes Incorporated has announced two highly integrated synchronous buck converters that simplify circuit design in automotive power systems with its Power Good output and its innovative EMI mitigation for noise-sensitive applications. The AP63356Q and AP63357Q are 3.5A converters with an input voltage range of 3.8V to 32V. Leveraging peak current mode control as well as […]
Tiny automotive-compliant, 40V dual MOSFET boasts low RDS(on) resistance
Diodes Incorporated announced the industry’s first automotive-compliant 40V dual MOSFET in a 3.3mm x 3.3mm package. The DMT47M2LDVQ can replace two discrete MOSFETs to reduce the board space footprint in many automotive applications, from electric seat control to advanced driver-assistance systems (ADAS). The DMT47M2LDVQ integrates two n-channel enhancement-mode MOSFETs with the industry’s lowest RDS(ON) for […]
Auto-compliant, 3.5-A, sync buck converters target POL apps
Diodes Incorporated announced the AP64350Q/AP64351Q/AP64352Q series of automotive-compliant, 3.5A, synchronous buck converters for point of load (POL) applications. The AP6435xQ combines a low quiescent current with a wide input voltage range of 3.8V to 40V. The devices have been developed for use in automotive applications including infotainment systems, instrument clusters, telematics, advanced driver assistance systems (ADAS), […]
Low-dropout regulator delivers high PSRR in small footprint for noise-sensitive applications
Diodes Incorporated announced the AP7353 low dropout regulator, which offers a high power supply rejection ratio (PSRR) in a small package, meeting the need for voltage regulation in noise-sensitive, battery-operated devices such as wearables, portables, and connected sensors. The AP7353 is available in X1-WLB0707-4 (Type A1) and X2-DFN1010-4 (Type B) packages, each measuring less than […]
Dual MOSFETs integrated into single package measuring just 3.3mm x 3.3mm
Diodes Incorporated announced the availability of the first in a new generation of discrete MOSFETs. The DMN3012LEG delivers increased efficiency in a smaller package to provide significant cost, power, and space savings in a wide variety of power conversion and control applications. The DMN3012LEG integrates dual MOSFETs in a single package measuring just 3.3mm x […]
