Diodes Incorporated has launched a complete 130W USB Type-C power delivery (PD) 3.0 adapter evaluation and development kit. This new solution uses SuperGaN FETs from Transphorm, Inc. The kit pairs Diodes’ high-performing, innovative ACF controllers and Transphorm’s patented normally-off SuperGaN Gen IV devices with input power factor correction (PFC). The resulting solution delivers low standby […]
diodesincorporated
Three-chip set promotes ultra-high-power-density USB Type-C PD systems
Diodes Incorporated has launched a three-chip solution for enhancing the performance of ultra-high-power-density USB Type-C power delivery (PD) systems. These products can be used in a wide variety of consumer electronics applications, including smartphone chargers and notebook adapters. The AP43771V USB Type-C PD decoder is compatible with PD3.0, PPS Rev 3.0, V1.2 (TID – 4305), and […]
Automotive-compliant, current limit power switch can be set between 125mA and 1735mA
Diodes Incorporated introduces the AP22653Q programmable current limiting power switch. Streamlining power system design and assuring ongoing reliability, this automotive-compliant device provides a controlled and protected power path. It is rated to handle continuous load currents of up to 1.5A. Key applications include protection of vehicle USB ports and ECU supply rails, and infotainment and telematics […]
Redrivers meet modern standby mode requirements
Diodes Incorporated has introduced the PI3EQX12902E/PI3EQX12904E to further strengthen its ReDriver product offering. These ReDrivers meet the Modern Standby mode requirements as outlined by Microsoft Corporation, and deliver elevated linearity and ultra-low jitter characteristics now expected in laptop, notebook, industrial PC, and embedded system designs. Operating from a 3.3V rail and in standby mode, the […]
Redriver helps extend PCB trace lines, minimizing power and BOM costs
Diodes Incorporated has announced a new addition to its extensive range of linear ReDriver ICs. The PI3UPI1608helps significantly extend PCB trace lengths, while minimizing power consumption and associated bill-of-materials costs. Supporting speeds of up to 20Gbps, this UPI 2.0 and PCIe 4.0 compliant device has eight differential channels. Its built-in coupling capacitors allow significant board […]
Three-channel linear LED drivers targets automotive rear lamp cluster design
Diodes Incorporated has expanded its portfolio of devices supporting automotive exterior illumination with the introduction of the AL5873Q three-channel linear LED driver targeted at simplifying rear lamp cluster designs. Rated for 125°C ambient temperature operation, this automotive-compliant, AEC-Q100 Grade 1 qualified device meets the demands of next-generation vehicle design – while also providing energy and space […]
Dual power rail I2C bus GPIO expanders are automotive-compliant
Diodes Incorporated has announced 16-bit PI4IOE5V6416Q and 34-bit PI4IOE5V6534Q bidirectional voltage-level translation general-purpose I/O (GPIO) expanders for automotive applications. Representing an industry first for the automotive industry, the automotive-compliant, AEC-Q100 Grade 2 qualified devices with dual voltage rail provide enhanced programmable I/O for next-generation low voltage microprocessors and microcontrollers via the I2C interface. As part of Diodes’ ongoing […]
Autosensing level shifter IC addresses lower voltage processors and MCUs in automotive systems
Diodes Incorporated has expanded its family of voltage-level shifters, with the release of the PI4ULS3V304AQ. This advanced level shifting technology, featuring high degrees of flexibility, is proving vital to modern automobile design. It addresses the challenge of lower voltage microprocessors and microcontrollers incorporated into automotive systems, which are required to drive external devices operating at […]
Integrated buck converters simply circuit design in automotive power systems
Diodes Incorporated has announced two highly integrated synchronous buck converters that simplify circuit design in automotive power systems with its Power Good output and its innovative EMI mitigation for noise-sensitive applications. The AP63356Q and AP63357Q are 3.5A converters with an input voltage range of 3.8V to 32V. Leveraging peak current mode control as well as […]
Tiny automotive-compliant, 40V dual MOSFET boasts low RDS(on) resistance
Diodes Incorporated announced the industry’s first automotive-compliant 40V dual MOSFET in a 3.3mm x 3.3mm package. The DMT47M2LDVQ can replace two discrete MOSFETs to reduce the board space footprint in many automotive applications, from electric seat control to advanced driver-assistance systems (ADAS). The DMT47M2LDVQ integrates two n-channel enhancement-mode MOSFETs with the industry’s lowest RDS(ON) for […]
