EPC announces the availability of the EPC9137, a 1.5 kW, two-phase 48 V – 12 V bidirectional converter that operates with 97 % efficiency in a very small footprint. The design of this demonstration board is scalable; that is, two converters can be paralleled to achieve 3 kW or three converters can be paralleled to […]
epc
Demo board powers 400-W BLDC motors with GaN
EPC announces the availability of the EPC9146, a 400 W motor drive demonstration. The EPC9146 power board contains three independently controlled half-bridge circuits, featuring the EPC2152 monolithic ePower Stage with integrated gate driver, 80 V maximum device voltage, 15 A (10 ARMS) maximum output current. The inverter board measures just 81 mm x 75 mm […]
Lidar laser IC includes 40-V, 10-A FET, integrated gate driver, LVDS logic-level input
EPC announces the introduction of a laser driver that integrates a 40 V,10 A FET with a gate driver and low-voltage differential signaling (LVDS) logic level input in a single chip for time-of-flight lidar systems used in robotics, drones, augmented reality, and gaming applications. The EPC21603 is a laser driver that is controlled using LVDS […]
Laser driver IC targets lidar time-of-flight apps
EPC announces the introduction of a laser driver that integrates a 40 V, 10 A FET with integrated gate driver and 3.3 logic level input in a single chip for time-of-flight lidar systems used in robotics, surveillance systems, drones, autonomous cars, and vacuum cleaners. The EPC21601 is a laser driver that is controlled using 3.3 […]
eGaN DC-DC demo board comes in tiny 1/16th brick size
EPC announces the availability of the EPC9157, a 300 W DC-DC demo board in the tiny 1/16th brick size, measuring just 33 mm x 22.9 mm x 9mm (1.3 x 0.9 x 0.35 in). The EPC9157 demo board integrates the Renesas ISL81806 80 V dual synchronous buck controller with the latest-generation EPC2218 eGaN FETs from […]
eGaN demo board covers 48-V dc-dc conversion
EPC announces the availability of the EPC9148 and EPC9153 demonstration boards for 48 V DC-DC conversion. The EPC9153 is a 250 W, extremely thin, power module using a simple, low-cost synchronous buck configuration delivering a 98.2% peak efficiency with a maximum component height of 6.5 mm. The EPC9148 utilizes a multilevel topology enabling a maximum […]
eGaN 200-V FETs sport low on resistance, small package size
EPC advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of the EPC2215 and EPC2207 200 V eGaN FETs. The applications for these leading-edge devices include class D audio, synchronous rectification, solar MPPTs (maximum power point tracker), DC-DC converters (hard-switched and resonant), and multilevel high voltage converters. The EPC2215 […]
Reliability report covers gallium-nitride power semiconductors
EPC announces its Phase Eleven Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. This strategy relied upon tests forcing devices to fail under a variety of conditions to create stronger products to serve demanding applications such as lidar for autonomous vehicles, LTE base stations, vehicle headlamps, and satellites to name […]
Achtung! Power technology on display at PCIM Nuremberg
PCIM Europe is billed as the world’s leading exhibition and conference for power electronics, intelligent motion, renewable energy, and energy management. Recently wrapping up in Nuremberg, the exhibition portion of PCIM featured over 500 booths. Here are some of the more notable technology displays we saw in touring the event. NEXT PAGE: Smaller inverters for […]
eGaN FET gets automotive AEC Q101 qualification
EPC announces successful AEC Q101 qualification of the 80 V EPC2214 designed for lidar systems in the automotive industry and other harsh environments. eGaN technology has been in mass production for over nine years, accumulating billions of hours of successful field experience in automotive applications, such as lidar (Light Detection and Ranging) and radar for […]