TDK Corporation has announced the MAF0603GWY series, noise suppression filters measuring 0.6 mm × 0.3 mm × 0.3 mm for smartphones, tablets and wearable devices, with mass production scheduled for April 2026. The series uses a proprietary low-distortion ferrite material to suppress high-frequency noise from audio lines while minimizing changes to audio characteristics, with impedance […]
tdkcorporation
Compact varistor handles 50 kA surge and 200 kA short-circuit current
The MT40 ThermoFuse varistors from TDK Corporation are surge protection components that integrate a metal oxide varistor with a thermal disconnect system in a compact 38.0 × 15.2 × 40.9 mm package. The devices support peak surge currents up to 50 kA (8/20 μs) and short-circuit current ratings up to 200 kA and are UL […]
350 VAC X2 capacitors support 2.5 kV pulses
The B3292xU/V series from TDK Corporation is an X2 safety film capacitor family rated at 350 V AC for interference suppression in industrial and automotive systems. Available with lead spacings from 15 mm to 52.5 mm and capacitance values from 47 nF to 20 µF, the capacitors withstand peak voltage pulses up to 2.5 kV […]
Three-phase programmable supply supports up to 3000 W
The HWS3000GT4 from TDK-Lambda is a 3000 W programmable AC-DC power supply featuring a 340 – 528 Vac three-phase input and fully programmable CV/CC output across nominal voltages from 24 V to 250 V. Housed in a 270 x 150 x 61 mm chassis, the unit supports RS485 (MODBus) or analog control, series or parallel […]
DC link capacitors rated for continuous operation up to +125 °C
The B3271xP series from TDK Corporation is a range of DC link film capacitors rated for operating temperatures up to +125 °C with no power derating to +105 °C, designed for automotive and industrial power electronics such as xEV traction inverters, onboard chargers, DC-DC converters and solar inverters. The series offers capacitance values from 0.47 […]
Stackable power modules deliver up to 200 A vertical power
The FS1525 µPOL from TDK Corporation is a low-profile non-isolated DC-DC point-of-load power module delivering up to 25 A in a 7.65 x 6.80 mm footprint and just 3.82 mm height, designed for vertical power delivery directly beneath FPGA, SoC or ASIC devices. Based on 3D chip-embedded packaging, it integrates controller, MOSFETs, inductor and passives, […]
DC link capacitors support 105 °C operation without power derating
The ModCap UHP (B25648A) series from TDK Corporation is a DC link capacitor family for SiC-based power inverters, supporting 1350 V to 1800 V DC ratings, 470 µF to 880 µF capacitance and 8 nH ESL with continuous operation at hotspot temperatures up to +105 °C without derating. The design uses a high-temperature dielectric and […]
4500 W industrial power supplies support series and parallel operation
The TPS4500 series from TDK Corporation is a single- or dual-output industrial power supply rated at 4.5 kW, supporting series or parallel operation and load sharing across configurable outputs up to 92 V/49 A or 184 V/24.5 A. Designed for 360–528 Vac three-phase Delta or Wye inputs, the units integrate PMBus™ monitoring and control, isolated […]
Hybrid polymer series gains 30 g design
TDK Corporation has expanded its B409x series of SMD hybrid polymer aluminum electrolytic capacitors with a vibration-resistant design rated to 30 g per MIL-STD-202, Method 204, achieved through four stabilizing posts on the base plate. The series offers voltage ratings from 25 V – 80 V, capacitance from 56–1100 µF, and low ESR with high ripple current […]
NTC inrush limiters for high-power supplies
TDK Corporation introduces the new S series inrush current limiters (ICLs), comprising the S30 (ordering code: B57130S0*M000) and S36 (B57136S0*M100) families of NTC thermistors. With maximum steady-state currents of up to 35 A and energy absorption capabilities of up to 750 J, the components are optimized for high-power applications that demand reliable suppression of inrush […]
