Aimtec’s new addition to the AM1DR-NZ series of 1 watt power supplies features a regulated output signal with higher input to output isolation of 3000 VDC (tested for 60 seconds during manufacturing). Supported input voltages of 5, 12, or 24 VDC converted to single output voltages of 5, 12, 15 or 24 VDC. The series […]
DC-DC
2 Watt DC-DC converter offers short-circuit protection and wide temperature range
Aimtec announces the AM2DS-NZ, 2-W series DC-DC unregulated converters. AM2DS-NZ feature continuous short-circuit protection with automatic recovery restart. The restart feature will work continuously until the short-circuit condition is cleared protecting the converter, the load and the converter’s input circuit and source from extremely high currents caused by output short circuits. Supported input voltages are […]
DC-DC step-down converter features low Vin and integrated inductor
Altera, now a part of Intel Corporation, has expanded its Enpirion power products portfolio with a 6A PowerSoC DC-DC step-down converter that is a full-featured, highly integrated, and fully tested PowerSoC with integrated inductor. The new PowerSoC (EN6362QI) is the first in a new generation of low-VIN (input voltage) power products that offer industry-leading power density while […]
Compact 5 Watt DC/DC converter from Traco
The cubical package of only 1.23 cm3 encloses a sophisticated circuit which provides 5 Watt output power without any compromise regarding reliability and functionality. They operate up to 50°C environment temperature at full load or up to 75°C with a 50% load de-rating. With 1500 VDC I/O-isolation voltage, external On/Off, short current protection and EMC […]
Control and monitor with Sealevel eI/O-160E and 160PoE TTL I/O modules
Control and monitor up to 32 channels of buffered drive TTL digital I/O via any 10/100BaseT Ethernet connection with the eI/O-160E digital I/O module. The eI/O module addresses the 32 channels of I/O as four eight-bit ports, each programmable as input or output. A 50-pin header connects the module to industry-standard solid-state relay racks to […]
1 watt surface mount DC-DC converters certified for medical use
Murata has introduced the NXJ1, a series of single output, high reliability, high isolation, 1W surface-mount DC-DC converters designed for medical products, with other applications in industrial, transport, and telecom markets. Manufactured by Murata Power Solutions and measuring only 13.72 x 10.46 x 4.36 mm, this compact low-profile series features six models comprising nominal input […]
LDO linear regulator delivers 500 mA output with 300-mV dropout at full load
Linear Technology Corporation announces the LT3066, a high voltage, low noise, low dropout voltage linear regulator offering precision, programmable current limit, active discharge, a power good flag and improved power supply rejection ratio (PSRR) capability. The device delivers up to 500mA output current with a 300mV dropout voltage at full load. The LT3066 includes an […]
New analog input solid state proportional controllers
CARLO GAVAZZI is proud to announce the launch of their new Single Phase RGx1P Proportional Output Controllers. With a typical solid state relay, the output from measuring or monitoring devices is an analog signal that needs to be converted to a discrete signal to control a ‘common’ solid state relay. This can be costly, complicated […]
Controller diode-ORs two supplies for hot swapping
Linear Technology Corporation introduces the LTC4236, a dual ideal diode-OR and single Hot Swap controller with a load current monitoring output. High availability systems-servers, network routers, and solid-state drives-power circuit boards with multiple power supply feeds. The LTC4236 combines (diode-ORs) two power supplies while providing inrush current control, overcurrent protection, and current monitoring, all in […]
High efficiency DC/DC converters step-down 5V rails to point-of-load
Intersil Corporation has announced five new highly integrated synchronous buck regulators that step-down 5V rails to point-of-load (POL) inputs as low as 0.6V for FPGAs, DSPs and microprocessors. The feature-rich ISL8018 delivers up to 8A of continuous output current from a 2.7V to 5.5V input supply, while offering up to 97% efficiency and higher integration […]