Eaton® has launched a new portal to highlight the impressive footprint and power density that is offered in the Powerware three-phase lineup. This site is also a repository of information, including white papers and important footprint considerations. www.powerware.com ::Design World::

(Tualatin, OR) –V-Infinity, a division of CUI Inc, introduces a series of high density, medically approved open frame switching power supplies.  The VMS-160 series outputs 160W with 200 LFM forced air cooling or 100W under convection-cooled conditions.  This translates to a power density of 18 W/in³ in a 1U, industry standard, 2” x 4” footprint.  […]

The ultra-compact SDN-C power supplies come in 5 and 10 amp, 24 Vdc output sizes. Features include built-in sag immunity, power factor correction, PowerBoostTM overload capability, and universal voltage input (85 to 264 Vac, 50/60 Hz). For diagnostic purposes, the units use bright LEDs to indicate input and output status. Sola/Hevi-Dutywww.solaheviduty.com : Design World :

The QUINT SFB industrial grade power supply has Selective Fuse Breaking (SFB) technology to give up to six times nominal current for 12 months. With a short burst of current, individual circuit breakers can react to overloads. Faulty current paths are shut down, and the power supply continues to give power to the other loads. […]

The TreStar P line of online, double-conversion, three-phase, Uninterruptible Power Supplies (UPS) for critical loads has a digital control system to eliminate all overloads, frequency variations, transients, flicker, and blackouts in real-time.  Up to eight TreStar P modules can be installed in parallel for redundancy or additional capacity. They include a user-friendly front control panel […]

(Middletown, PA) – Phoenix Contact introduces the QUINT SFB family of industrial grade power supplies. The QUINT SFB is the first industrial grade power supply to feature Selective Fuse Breaking (SFB), a technology that increases system reliability. SFB technology provides up to six times nominal current for 12 ms. This short burst of current allows individual […]

The PLA Series linear replacement adapters are universal input California Energy Commission (CEC) -compliant. The low-cost adapters use one primary control circuit. They maintain the benefits of a wide-range input switcher but without the output regulation. They come as fixed wall plugs (1.3, 2, 3, and 5W). The adapters have double insulation and short circuit […]

The WSI 4 low-profile (1.55 in. /39.4 mm) fuse terminal is ideal for implementing short-circuit and overload protection for process and industrial applications. It is suitable for electrical cabinets to protect power supplies or additional critical loads. The terminal has a standard 2.5 mm2 screw clamping system (22…12 AWG) and uses a standard 5×20 mm […]

Small, lightweight, single-output 5- to 15-W AC-DC power supplies mount directly on a printed circuit board (PCB). Units come in three power levels and package sizes from 1.38 x 2.17 x 0.79 in.  (5Wmodels) to 1.89 x 2.75 x 0.91 in. (15Wmodels). They are available in all commonly used output voltages from 3.3 to 24 […]

Lambda has expanded its popular NV family of configurable AC-DC power supplies, adding a product series that supplies 300W. The new NV-300 series is especially suitable for use in high-density medical, data communications, and test-and-measurement equipment. Units measure a compact 3.75 x 7.25 x 1.34 in., making them compatible with 1U enclosures. They can provide […]