TDK Corporation announces the TDK-Lambda DTM250-D external AC-DC power supplies. This series meets the stringent DoE Level VI and EU Tier 2 v5 standards for both average efficiency and off-load power. The DTM250-D is certified to the medical IEC 60601-1 and industrial IEC 60950-1 standards, making it suitable for higher power medical, dental, test, measurement […]
tdklambdacorporation
Compact, conduction-cooled 504-W ac-dc modules offer PMBus communication
The conduction cooled TDK-Lambda PFH500F-28 ac-dc power modules are rated at 28 V 504 W, feature a compact 4×2.4-in footprint and have optional read/write programming and communication through a PMBus interface. These third-generation power supplies are candidates for a variety of applications including COTS (Commercial-Off-The-Shelf), power amplifiers, LED displays and test equipment. The PFH500F-28 series […]
Class II, Level VI external 110-W-rated supplies carry home medical and ITE safety certifications
The TDK-Lambda medical and industrial certified DTM110-C8 Class II (no earth ground needed) external power supplies meet stringent DoE Level VI and EU Tier 2 v5 standards for efficiency and off-load power. The DTM110-C8 is certified to the medical IEC 60601-1 and industrial IEC 60950-1 standards, making it suitable for a variety of hospital and […]
1 kW and 1.5 kW supplies include optional 5-V standby outputs
An isolated 5-V, 1-A standby voltage option is now available for the RWS1000B and RWS1500B industrial ac-dc power supplies. Applications include industrial, test & measurement, broadcast, communications and LED signage equipment. Rated at 1,000 W and 1,500 W the additions are available with 12, 15, 24, 36 and 48-V main outputs and can accept an […]
Low acoustic noise 1,500-W medical & ITE power supplies meet Class B conducted & radiated EMI
The TDK-Lambda 1,500-W rated CUS1500M series of ac-dc power supplies extend the CUS-M family of products to now cover 30 to 1,500 W. The CUS1500M has both medical and ITE (Information Technology Equipment) certifications and is well suited for industrial, medical, cosmetic laser treatment and analysis equipment requiring less than 300 µA earth leakage current, […]
15W and 30W dc-dc converters boast operating efficiences up to 92 percent
TDK Corp. announces the introduction of the TDK-Lambda 15W and 30W rated dual output CCG DC-DC converters. Operating over a 4:1 input range, these highly efficient products are enclosed in a 1 inch by 1-inch six-sided shielded metal case. Applications include data and telecommunications, process control, broadcast, battery powered and test and measurement equipment. The […]
Single-output 600-to-1,200-W supplies provide MoPPs isolation, low acoustic noise, PMBus communication
The QS series of single output medical and industrial power supplies have full MoPPs (Means of Patient Protection) isolation, low acoustic noise and a range of options including a PMBus communication with a high current standby voltage. With medical and industrial safety certifications, the power supplies are suitable for use in medical, test and measurement, […]
Compact 6 to 30-A, 250-V EMC filters are easy to install
The TDK-Lambda RSEV series of EMC filters, with a voltage of 250 Vac/Vdc and a choice of 6, 10, 16, 20 and 30-A current ratings, has an integrated touch-resistant terminal block with recessed, captive screws. Hardware cannot be misplaced or dropped inside the system enclosure. The filters are suitable for general purpose use in a […]
Conduction/convection cooled supplies only 31-mm high handle 206-W peak loading
The TDK-Lambda CUS200LD ac-dc power supply, rated at 120 W convection or 150 W conduction cooled, can deliver up to 206 W for up to 10 seconds to drive peak loads associated with dynamic LED displays. The product’s 31-mm height allows the product to be mounted inside low profile signage, or industrial equipment with limited […]
Medical / ITE certified 2×4-in. supplies work up to 85°C
The TDK-Lambda brand CUS150M series of ac-dc 150-W rated power supplies operate in ambient temperatures of up to 85°C without the need for forced air cooling. Certified to medical and ITE standards for Class I and II (no earth ground connection) operation, the product meets both curve B radiated and conducted emissions. CUS150M target applications […]
