TDK Corporation announces the introduction of the 200W and 300W rated TDK-Lambda CN-B110 series of half brick DC-DC converters. Capable of operating from a wide input voltage of 43 to 160Vdc the converters are compatible with 72Vdc or 110Vdc nominal railway systems. Applications include rolling stock, railway trackside equipment, robotics, AGVs, and scientific research equipment. […]
Industrial
AC/DC din-rail supplies power medical and industrial applications
COSEL Co, Ltd announced the launch of three new DIN Rail AC/DC power supplies for industrial applications. Based on its long experience and expertise in developing high-efficiency power conversion solutions for demanding industrial applications optimized for highly automated manufacturing, Cosel’s design team has developed without compromising a new family, the WDA family that shortens Time-To-Market. […]
UVC emitting diodes offered in ceramic- and quartz-based packages
Vishay Intertechnology, Inc. introduced two new UVC (short wavelength ultraviolet) emitting diodes in a ceramic / quartz-based package for sterilization in medical, industrial, and consumer applications. Compared to previous-generation solutions, the Vishay Semiconductors VLMU35CR40-275-120 and VLMU35CR41-275-120 deliver higher radiant power at a lower cost while offering higher disinfection efficiency and longer service life. The devices […]
200-V MOSFETs target EV motor control, power supplies
Magnachip Semiconductor Corporation announced that the company has introduced its third-generation 200V Medium Voltage (MV) Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) for Light Electric Vehicles (LEV) motor controllers and industrial power supplies. To maximize energy efficiency in power devices, Magnachip’s new 200V MOSFETs incorporate third-generation trench MOSFET technology. The capacitance was reduced by 50% compared to the previous generation […]
Single-phase EMC filters handle protection class II apps
SCHURTER announces its new FMAB NEO single-phase EMC filter for Protection Class II applications. This new double-insulated filter with no protective ground expands SCHURTER’s latest EMC filter family to include both Protection Class I and Class II versions. The Class II version meets the more stringent requirements for critical medical systems and at-home medical care […]
Window-type 40-V voltage detector targets auto, industrial uses
ROHM Semiconductor announced its new high accuracy, ultra-low current consumption voltage detector (reset IC) BD48HW0G-C. The device is optimized for a wide range of automotive and industrial applications requiring voltage monitoring of electronic circuits for increased safety, including automotive electronic control units and factory automation equipment. In recent years, technological innovation in the automotive and industrial […]
Beefy 800-W convection-cooled supplies handle 300% peak power for three seconds
COSEL Co, Ltd announced the introduction of 800W free-air convection cooling power supplies, the AEA800F series. With demanding applications in mind, the AEA800F is able to deliver 300% peak power for a period of up to 3,000 milliseconds. Designed for applications requiring a high level of safety, the AEA800F is certified according to the EN62477-1 […]
Load switch changes state in less than 60µs
STMicroelectronics has introduced the IPS1025HF fast-starting high-side power switch for use in safety systems that require minimal power-on delay time. The IPS1025HF responds to turn-on and turn-off signals in less than 60µs even considering the Vcc power-on and off, enabling protective systems to ensure a specified safety-integrity level (SIL). Featuring a very wide input-voltage range from 8.65V […]
Converters sport 2×1-in footprint, six-sided shielding for reduced radiated EMI
TDK Corporation announces the introduction of the 40W and 60W rated TDK-Lambda PXD series of 2”x1” DC-DC converters. Capable of operating from a wide input voltage of 9 to 36Vdc or 18 to 75Vdc, these converters have a copper case providing six-sided shielding for reduced EMI, simplifying system compliance. Industrial control, telecom/datacom, test, measurement, and […]
Signal transformers for BMSs sport high isolation, working voltages
With WE-BMS, Würth Elektronik presents signal transformers for battery management systems which, thanks to their galvanic isolation of 4300 VDC/1 min and high operating voltage of up to 1000 VDC, are ideal for use in energy storage systems, E-bikes, or E-scooters. Besides the transformers, the new WE-BMS series components also include at least one common-mode choke […]
