Electronic circuits frequently require zero-ohm jumpers for ease of manufacture or to make trace routing easier. Some of these applications require current handling that exceeds the capabilities of general-purpose or high current jumpers. Stackpole’s HCJ series offers more than double the current rating of comparable high current jumpers. The HCJ current ratings range from 5.8A for […]
Development Tools
Reverse-boost converter. excels in high-efficiency light-load apps
EPC announces the availability of the EPC9162, a bi-directional buck or reverse-boost converter. This demonstration board features the 100 V EPC2052 for the synchronous converter and the EPC2038 in the synchronous bootstrap FET circuit. The EPC9162 is by default programmed as a boost converter operating at 12 V input to 60 V/50 W output. However, […]
PXI, multi-cell battery simulator modules target automotive and aerospace applications
Pickering Interfaces launched a new family of battery simulator modules, ideal for Electric Vehicle (EV) battery stack emulation in Battery Management Systems (BMS) test applications. The 41-752A (PXI) and 43-752A (PXIe) modules enable direct voltage and current readback either programmatically or using Pickering’s soft panel control. Each cell simulator is highly accurate, specified at ±5 mV from 1 […]
Bay interface card increases maxim GPS-series power system capacity to more than 20,000 A
To help meet the need for more power from smaller-capacity rectifiers, ABB Power Conversion has developed a new bay interface card, BIC-11. With the upgraded bay interface card, maximum GPS-series power system capacity can be increased from 11,000 amps (A) to more than 20,000A. The bay interface card enables a single system controller to interface […]
Thin-film resistor comes in compact package
Stackpole Electronics’ CSRT2512-UP was developed to provide accurate, high-power current sensing for consumer and industrial electronic devices that exceed the capabilities of most 2512 case sizes available in the industry. The AEC-Q200 compliant CSRT2512-UP has unique thin-film material properties and processing to provide higher continuous power ratings and higher pulse power ratings than other thin […]
LED signaling devices increase levels of ambient light
Pfannenberg, Inc. announces the new BR50 Series Stacklight. The BR50 is the brightest stacklight available, which outshines previous Pfannenberg LEDs by 10,000 percent. The new BR50 Series Stacklight features an online configuration tool that makes it easier to design a simple stack light and provides a manufacturer’s suggested retail price (MSRP) and the resulting bill […]
Dual MOSFETs deliver ±40V/±60V withstand voltage required for 24-V input
ROHM Semiconductor announced the QH8Mx5/SH8Mx5 series of dual-MOSFET products (N-channel + P-channel) featuring ±40V/±60V withstand voltages. The devices are ideal for driving motors in base stations (cooling fans) and industrial applications, such as factory automation equipment requiring 24V input. In recent years, MOSFETs have become increasingly required to ensure sufficient margin against voltage fluctuations by providing 40V and 60V withstand […]
100-W railway / industrial DC-DC converter sports 12:1 input range
TRACO POWER announces the new TEP 100UIR family of 100 Watt DC/DC converters in a fully encapsulated, compact Quarter brick footprint with an ultra-wide 12:1 input range for harsh environments in railway and industrial applications. The ultra-wide 12:1 input voltage range (9-75 / 14-160 VDC) lets system builders reduce design variations required to satisfy varying […]
Compact 300/120-W GaN ac adapters meet DoE efficiency specs
CUI Inc announced the expansion of two GaN desktop ac-dc power supply series to its SDI product family, broadening their product range for the GaN adapter line. The SDI300G-U and SDI300G-UR offer 300 W of continuous power from a compact desktop package and boast up to 100% increase in power density compared to non-GaN units. […]
10-kW TVS components offer overvoltage suppression for critical aerospace/defense apps
SSDI has released new, hermetic TVS products to offer overvoltage suppression for critical aerospace and defense applications. The ST10K100BT series delivers 10 kW of peak pulse power. This device was developed for a circuit breaker in a motor drive application for a space program. The TVS will protect the system by preventing parasitic inductive energy from causing […]
