Bourns, Inc. added four new product series to its line of shielded power inductors. The Bourns SRP4021HMCT, SRP4021HMT, SRP5030HMCT, and SRP5030HMT Shielded Power Inductor Series feature high heating and saturation current with low magnetic field radiation to deliver enhanced power handling, increased efficiency, and optimized power circuit filtering. The new shielded power inductors are produced with a hot press […]
Inductor
Automotive-grade inductors handle 200 mA to 1400 mA
Bourns, Inc. announced its CWF1610A, CWF1612A, and CWF2012A Series chip inductors. These AEC-Q200-compliant, automotive-grade inductors feature high inductance, high current, and high self-resonant frequency in a compact form factor. The features enable excellent power handling and filtering at high frequency, making the three new chip inductor series superior power conversion solutions in RF signal processing, resonant circuits, decoupling, noise filters, […]
Power inductors feature low DC resistance
Bourns, Inc. announced its HRP3822X and HRP5022X Series Shielded Power Inductors. These very high current power inductors feature low DCR and shielded construction for low radiation. Designed to help maintain stable current flow and enhance efficiency in high power applications, Bourns new shielded power inductors are optimal current management solutions for today’s industrial high current filters, high current battery charging, […]
Micro power converters integrate i²c telemetry in 1.35 mm height profile
TDK Corporation announces the new FS160* series of its microPOL (μPOL) power modules. The FS160* series of μPOL DC-DC converters all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes now in mass production. All FS160* microPOL modules measure a mere 3.3 mm wide by 3.3 mm […]
Inductors support power over coax
TDK Corporation announces the expansion of the ADL4532VK series (4.5 x 3.2 x 3.2 mm; L x W x T) of wire winding inductors for automotive power-over-coax (PoC). Mass production of these new components began in February 2025. Advanced driver-assistance systems (ADAS) are designed to enhance vehicle safety by using automotive cameras and sensors that […]
Resin-shielded power inductors span 3.2 mm to 8.3 mm sizes
Sumida America has introduced a family of Resin-Shielded Surface-Mount Power Inductors. In this new design, Sumida was able to enhance both the magnetic shielding effect and the mechanical impact strength of the components. Cost is competitive or better than traditional construction. Ferrite or Metal Composite Resin-Shielded inductors are produced similarly to traditional drum and ring […]
Shielded power inductors feature dual windings
Bourns, Inc. announced its Model SRF0703HA Series Dual-Winding Shielded Power Inductor Series. Bourns new AEC-Q200 compliant, automotive grade power inductors can be used in parallel, series, dual-inductor, or transformer configurations, giving designers outstanding rated current and inductance versatility. In addition, the single-package dual-winding inductors provide a space-saving and cost-efficient solution compared to using two individual inductors. They’re […]
Energy harvesting PMIC family reduces circuit board space with inductor-less design
Nexperia is expanding its energy harvesting portfolio with the NEH71x0 power management IC (PMIC) family. This advanced PMIC line combines superior performance, cost-efficiency, and versatility, setting a new standard in sustainable design for low-power applications. Unlike competing products, these devices eliminate the need for an external inductor, significantly reducing circuit board space and bill-of-materials (BOM) […]
Inductors offer 470 nH to 1.5 µH range
TDK Corporation introduces the PLE856C Series of thin-film power inductors measuring 0.80 x 0.45 x 0.65 mm (L x W x T) for wearable devices. Mass production began in December 2024. The PLE856C Series offers inductances from 470 nH to 1.5 µH, with saturation currents specified between 0.40 A and 0.72 A (typ.). Compared to […]
Multilayer inductors support 480 mA current in PoC applications
TDK Corporation announces the expansion of the MLJ1005-G series (1.0 x 0.5 x 0.5 mm; L x W x T) of multilayer inductors for automotive Power-over-Coax (PoC) circuits. Mass production of these new components began in November 2024. Advanced driver assistance systems (ADAS) are designed to enhance vehicle safety by using automotive cameras and sensors […]
