Renesas Electronics Corporation announced a new radiation-hardened 16-channel current driver with integrated 4-bit decoder for reducing the size, weight and power (SWaP) of satellite command and telemetry systems. The ISL72814SEH integrates the decoder, input level shifter, and 16 current driver arrays in a single monolithic IC. The device allows satellite manufacturers to significantly increase system […]
Rad-tolerant PWM controller/GaN FET driver first to come in a plastic package
Renesas Electronics Corporation announced the space industry’s first plastic-packaged, radiation-tolerant PWM controller and Gallium Nitride (GaN) FET driver for DC/DC power supplies in small satellites (smallsats) and launch vehicles. The ISL71043M single-ended current mode PWM controller and ISL71040M low-side GaN FET driver are ideal for isolated flyback and half-bridge power stages, and motor control driver […]
Rad-tolerant digital isolators provide 2.5kVrms of isolation and 600Vrms continuous voltage
Renesas Electronics Corporation introduced two plastic packaged, radiation-tolerant digital isolators that provide the highest isolation protection (2,500VRMS) from high voltage spikes in power supply stages and serial communications interfaces used in low Earth orbit (LEO) Small Satellites (SmallSats). Private “New Space” companies plan to launch thousands of SmallSats forming large constellations that operate in multiple […]
First USB-C combo buck-boost battery charger for mobile computing systems
Renesas Electronics Corporation introduced the industry’s first USB-C buck-boost battery charger to support both Narrow Voltage Direct Charging (NVDC) and Hybrid Power Buck-Boost (HPBB) charging for notebooks, ultrabooks, tablets, and power banks using the reversible USB Type-C connector cable. Through firmware control, the ISL9241 can switch between NVDC and HPBB modes, providing a low-cost and […]
Automotive-grade 100-V, 4-A half-bridge N-channel MOSFET drivers target hybrid powertrains
Renesas Electronics Corporation announced a new family of automotive-grade 100V, 4A half-bridge N-channel MOSFET drivers. The ISL784x4 family features three devices: the ISL78424 and ISL78444 with single tri-level PWM input for controlling both gate drivers, and the ISL78434, which has dual independent inputs that separately control the high-side and low-side drivers. The ISL784x4 half-bridge N-MOSFET […]
Implementing full digital power control for LDOs
Today’s power supplies require flexible power solutions and more digital control than a decade ago, especially in the server cloud computing market. The days of de-soldering resistors and capacitors to tweak a voltage control loop are long gone. Historically, digital power control started with a single-phase, point-of-load (POL) regulator with PMBus interface. Today, it has […]
Digital power modules target data center servers, networking equipment
Renesas Electronics Corporation announced a new family of encapsulated digital DC/DC PMBus power modules. The five RAA210xxx simple digital power modules offer advanced digital telemetry and performance, and are as easy to use as Renesas’ analog power modules. They are complete step-down regulated power supplies that deliver 25A, 33A, dual 25A, 50A, and 70A of […]
Bi-directional synchronous buck-boost controllers
Renesas Electronics announces an innovative new family of bidirectional four-switch synchronous buck-boost controllers. The ISL81601 and ISL81401 are the industry’s only true bidirectional controllers that sense peak current at both ends and provide a cycle-by-cycle current limit in both directions while in buck or boost mode. The controllers generate point-of-load (POL) and voltage rail conversions […]
Optocouplers, Part 2: Parameters and applications
Part 1 of this FAQ explored the basics of the optocoupler. This part looks at key parameters and some application examples. Q: What are the primary factors used when assessing an optocoupler? A: While there are many important factors, there are several which are noteworthy: isolation, current-transfer ratio (CTR), linearity (for analog use), and speed. […]
Optocouplers, Part 1: Principles and usefulness
The optocoupler — also called an optoisolator — is among the most useful, versatile, problem-solving components available to the design engineer. This small non-monolithic device does one thing and does it well, with minimal complications in most cases and no software. This FAQ will look at its operation principles, key parameters, and applications of this […]
@PowerElectrTips
EE World Online
YouTube
Instagram