EPC & Richtek announces the availability of a 4-switches bidirectional buck-boost controller reference design board that converts an input voltage of 12 V – 24 V to a regulated 5 V – 20 V output voltage and delivers up to 5 A continuous current and 6.5 A maximum current. The combination of the new Richtek […]
Reference design
Cloud-based digital twin helps improve EV battery performance
NXP Semiconductors has developed a solution to connect its high-voltage battery management system (HVBMS) through its S32G GoldBox vehicle networking reference design to the cloud to leverage an artificial intelligence (AI) powered battery digital twin. By utilizing Electra Vehicles, Inc.’s EVE-Ai 360 Adaptive Controls technology, NXP unleashes the power of digital twin models in the cloud to […]
Turnkey GaN 140-W charger reference design covers USB PD3.1, single port type-c
GaN Systems announced the availability of a new turnkey 140W AC/DC charger reference design with USB PD3.1, Single Port Type-C Output. Compared to silicon-based chargers, this design is 40% lighter and 50% smaller, featuring an ultra-high-power density of 23W/in3. This design enhances GaN Systems’ portfolio (65W, 100W, 140W, 250W) of turnkey charger solutions for the consumer electronics market, […]
Compact eGaN FETs target high power density converter apps
Efficient Power Conversion Corporation expands the selection of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2066 (0.8 mΩ typical, 40 V) GaN FET. The low losses and small size of the EPC2066 make it the ideal switch for the secondary side of high power density 40 V – 60 V to […]
eGaN 100-V FETs feature lower gate charges, zero reverse-recovery losses
Efficient Power Conversion Corporation expands the selection of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2071 (1.7 mΩ typical, 100 V) GaN FET. The EPC2071 is ideal for applications with demanding requirements for high power density performance including 48 V – 54 V input DC-DC for new servers and artificial intelligence. […]
High-efficiency quasi-resonant PFC IC carries 750-V GaN switch
Power Integrations announced the HiperPFS-5 family of power-factor-correction (PFC) ICs with an integrated 750 V PowiGaN gallium-nitride switch. With an efficiency of up to 98.3 percent, the new ICs deliver up to 240 W without a heat sink and can achieve a power factor of better than 0.98. HiperPFS-5 ICs are ideal for high-power USB […]
Ultra-high efficiency, low component count AC/DC supplies include power factor correction
Eggtronic has expanded its EcoVoltas family of high-efficiency AC/DC architectures with the launch of SmartEgg, a Zero Voltage Switching (ZVS) solution for power applications in the 75 to 1kW range that need both output voltage regulation and power factor correction (PFC). By enabling much higher no-load-to-full-load efficiency and a 50% smaller bill of materials (BOM) […]
GaN reference design covers 300-W audio boost converter
GaN Systems announced the launch of its 300W Audio Boost Converter SMPS at the 37th annual Applied Power Electronics Conference (APEC) in Houston. The 300W reference design, targeted for automotive, marine, motorcycle, and a broad range of 12VDC input applications, features a complete turnkey platform solution that accelerates time-to-market, delivering improved audio quality and smaller, more streamlined audio […]
Reference design covers multi-port production-ready fast charger
Silanna Semiconductor has announced its first multi-port fast charger reference design. Bringing together the company’s CO2 Smart Power families of advanced ACF controllers and high-frequency DC/DC converters, the new AnyPort RD-5 delivers a high-power-density, ultra-efficient, production-ready solution for multi-port 65W USB-PD applications. Representing the latest addition to Silanna’s growing family of silicon- and GaN-based fast […]
Reference design covers automotive in-cabin wireless charging stations
Renesas Electronics Corporation released a next-generation customer reference design for automotive wireless charging stations. The new P9261-3C-CRBv2 provides industry-leading features that enable automotive manufacturers to quickly and efficiently deliver premium performance and safety features for in-cabin wireless charging. The P9261-3C-CRBv2 solution includes the automotive-qualified wireless power controller P9261 with MP-A13 3-coils reference design as the wireless […]