EPC announces the introduction of a laser driver that integrates a 40 V, 10 A FET with integrated gate driver and 3.3 logic level input in a single chip for time-of-flight lidar systems used in robotics, surveillance systems, drones, autonomous cars, and vacuum cleaners. The EPC21601 is a laser driver that is controlled using 3.3 […]
Robotics
24-V input, -40/-60-V withstand voltage P-channel MOSFETs available in single, dual configurations
ROHM Semiconductor announced a 24-model lineup of 24V input, -40V / -60V withstand voltage P-channel MOSFETs available in both single (RqxxxxxAT / RdxxxxxAT / RsxxxxxAT / RFxxxxxAT) and dual configurations (UTxxx5/QHxxx5/SHxxx5). These new devices are ideal for industrial and consumer applications, such as factory automation, robotics, and air conditioning systems. In recent years, as demand […]
Single-output supply in 4 x 2-in footprint delivers 300 W
Vox Power announces the VCCS300S, a tiny conduction cooled power supply that delivers 300W of silent and dust-free output power from a tiny 4in x 2in x 1.61in (101.6 x 50.8 x 40.89 mm) package. Designed for the global industrial sector, the VCCS300S design focuses on high efficiency and reliability to offer maximum flexibility to design engineers […]
Low-cost non-isolated POL regulator modules provide up to 2 A
Introducing the SVR surface mount and VR through-hole, non-isolated DC-DC switching regulators. With efficiencies of up to 96% and operating temperatures of -40°C to +85°C, the Point of Load (PoL) devices are ideal as replacements for low-efficiency linear regulators. They operate from a wide input range of up to 36V and feature a low quiescent […]
eGaN FETs target USB-C chargers, PoL conveters
Efficient Power Conversion Corporation advances the performance capability of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2055 (3 mΩ, 40 V) eGaN FET. This device is ideal for applications with demanding requirements for performance in space-constrained form factors including USB-C battery chargers and ultra-thin point-of-load (POL) converters. Other low-voltage applications benefiting from […]
Chip Ferrite Beads for automotive applications handle up to 175°C
Murata has announced the release of the BLM18KN_EH series of chip ferrite beads for noise suppression in power lines at temperatures up to 175°C. Target applications are automotive equipment such as engine and transmission electronic control units (ECUs) and turbo motor controllers, with the components meeting AEC-Q200 qualification requirements. As electrification advances, the demand for […]
Synchronous dc/dc buck converter optimized for noise-sensitive apps
The STMicroelectronics L7983 is a compact, 3V-60V, 300mA synchronous DC/DC buck converter with flexible, dynamic-mode selection to satisfy noise-sensitive applications and maximize efficiency at light load. Special ST innovations engineered into the L7983 allow control of the low-side power MOSFET to provide a low-noise mode (LNM) with constant switching frequency and an alternative low-consumption mode (LCM). In LCM, […]
SMD MOSFETs cut losses in motor drive applications
Infineon Technologies AG supports the robotics and automation industry in implementing maintenance-free motor drive inverters. By introducing the new CoolSiC MOSFET with.XT interconnection technology in a 1200 V optimized D 2PAK-7 SMD package, passive cooling becomes possible. Up to 80 percent loss reduction compared to a silicon-based solution eliminates the need for cooling fans and […]
Rad-hard motor controller IC incorporates position sensing for satellites
The need to reduce size, weight, and power on satellites and other space systems continue to challenge the aerospace market. Combining more than 20 commonly used functions into a single chip, Microchip Technology Inc. announced the LX7720 radiation-hardened mixed-signal motor controller, the latest addition to its Space System Manager (SSM) product family. As the industry’s first highly […]
