Power Integrations announced the production release of the InnoSwitch3-AQ, an AEC-Q100-qualified flyback switcher with integrated 750 V MOSFET and secondary-side sensing. The newly qualified device family targets automotive EV applications, such as traction inverter, OBC (on-board charger), EMS (energy management DC/DC bus converters), and BMS (battery management systems). The InnoSwitch3-AQ uses Power Integrations’ high-speed FluxLink […]
powerintegrationsinc
High-voltage switcher ICs now certified for automotive use
Power Integrations announced an AEC-Q100-qualified version of its LinkSwitch-TN2 switcher IC for buck or non-isolated flyback applications. Featuring an integrated 750 V MOSFET, the new automotive-qualified LinkSwitch-TN2 IC provides simple and reliable power for EV sub-systems connected to the high-voltage bus, including HVAC, climate control, battery management, battery heater, DC-DC converter and on-board charger systems. The […]
New switcher ICs support 75-W power supply apps
Power Integrations announced that its InnoSwitch3-MX isolated switcher IC family has been expanded with the addition of three new PowiGaN devices. As part of a chipset with Power Integrations’ InnoMux controller IC, the new switcher ICs now support display and appliance power supply applications with a continuous output power of up to 75 W without a […]
SiC MOSFET driver with fast short-circuit response achieve AEC-Q100 qualifications
Power Integrations today announced that its SIC118xKQ SCALE-iDriver, a high-efficiency, single-channel gate driver for silicon carbide (SiC) MOSFETs, is now certified to AEC-Q100 for automotive use. Devices can be configured to support gate-drive voltage requirements of commonly used SiC MOSFETs and feature sophisticated safety and protection features. The SIC1182KQ (1200 V) and SIC1181KQ (750 V) SCALE-iDriver […]
APEC a no-show but Power Integrations is not — virtually
Yes, APEC 2020 organizers are promising paper presentations online but it looks like one fast and furious Silicon-Valley-based supplier of power electronics just took up the virtual-exhibit show banner with today’s launch of the Power Integrations Virtual Booth — APEC 2020. The premier global event in applied power electronics that was to take place this […]
GaN flyback switcher ICs enable 55-W heatsinkless power supplies
Power Integrations announced an expansion of its InnoSwitch 3 families of offline CV/CC flyback switcher ICs. The new INN3x78C devices incorporate a smaller “size 8” 750 V PowiGaN transistor, enabling compact, efficient power supplies delivering between 27 W and 55 W without heatsinks. The ICs are housed in the same high-creepage, safety-compliant InSOP™-24D package as larger […]
Gate drivers handle 4.5 kV press-pack IGBT modules
Power Integrations introduced the 1SP0351 SCALE-2 single-channel, +15/-10 V, plug-and-play gate-driver, developed specifically for new 4500 V press-pack IGBT (PPI) modules from manufacturers such as Toshiba, Westcode and ABB. Based on Power Integrations’ widely used SCALE-2 chipset, the new gate-drivers are perfectly suited for high-reliability applications such as HVDC VSC, STATCOM/FACTS and medium-voltage drives. The […]
Motor-driver IC boasts 99.2% efficiency, support for 400-W applications
Power Integrations announced that its BridgeSwitch integrated half-bridge (IHB) motor-driver IC family has been expanded and now supports applications requiring up to 400 W. BridgeSwitch ICs feature high- and low-side advanced FREDFETs (Fast Recovery Diode Field Effect Transistors) with integrated lossless current sensing, resulting in inverter efficiency of up to 99.2% in brushless DC (BLDC) motor-drive applications. […]
Auto-qualified driver ICs now available for 750 V-rated IGBTs
Power Integrations announced the launch of its automotive-qualified SID1181KQ SCALE-iDriver gate driver for 750 V-rated IGBTs. The new part expands the company’s range of auto-qualified driver ICs, following the introduction of the 1200 V SID1182KQ driver IC. Compact, efficient and highly robust, the new driver IC uses Power Integrations’ high-speed FluxLink communications technology to ensure […]
Innovative GaN ac-dc converter IC from Power Integrations earns 2019 Leap Award
The votes are in. Business-to-Business publisher WTWH Media, LLC, has announced the winners of the second-year Leadership in Engineering Achievement Program (LEAP) Awards, a design engineering product competition honoring the most exciting new products in a host of technology areas: Additive Manufacturing, Advanced Materials, Analog Electronics, Connectivity, Embedded Computing, Fastener Technology, Hydraulics, Industrial Automation, Mechanical, […]
