The TMR 8WI series from TRACO Power is a family of isolated DC/DC converters in a compact SIP-8 package supporting wide input ranges of 4.5–18 VDC, 9–36 VDC and 18–75 VDC with up to 89% efficiency. The converters provide 1500 VDC isolation, short-circuit protection, overcurrent limitation undervoltage lockout and remote on/off control, and are certified […]
tracopower
130 W power supply in 2 x 3” conduction-cooled package
TRACO POWER announces their TCI 130 series of conduction-cooled 130-watt enclosed power supplies, measuring only 2.35 x 3.15 x 1.7 inches. The TCI 130 series consists of 3 single output models with 12, 24, or 48 VDC outputs and are designed to maximize both efficiency and thermal performance. Up to 91% efficiency allows conduction-cooled operation […]
Switching power modules now in compact chassis mount package
TRACO POWER announces the expansion of their 5 / 10 / 25 / 50-watt TMPW series of encapsulated switching power supplies to now include suffix “T” models offering a compact chassis mount package with screw terminal connections. The TMPW family of 5~50 watt AC/DC modules are already available in both ‘PCB Mount’ and ‘Chassis Mount […]
150 and 200 W dc-dc converters with 12:1 input range
Traco Power announces their new TEP 150UIR and TEP 200UIR families of 150 and 200 watt DC/DC converters with a 12:1 input range (14-160VDC) in a fully-encapsulated half brick package. These converters enable design engineers to utilize a single power supply solution that accepts an array of nominal system voltages, including 24/48/72/110 VDC input. The […]
1 Watt SIP or SMD converter
Traco Power announces their TRI 1 (SIP-8) and TRI 1SM (SMD-14) families of 1-watt high isolation and regulated DC/DC converters for industrial, transportation, and instrumentation applications. Both SIP and SMD families feature: TRI 1 (SIP-8 models) offer 5 / 12 / 15V outputs TRI 1SM (SMD-14 models) offer 5 / 12 / ±12 / 15 […]
A better way to handle DC-DC converter hold-up times
Converters with built-in holdup circuitry reduce the size and requirements for input capacitors. Dr. André Buffing, L. Dinkelmann, Traco Power DC/DC converters are generally designed to maintain their output despite brief interruptions of their input power. The duration of this output hold-up often is set by the value of an external capacitor connected across the […]
Low-cost 30-W dc-dc converter features 4:1 input range
30-W dc-dc converters in the new THL 30WI series come in a standard 1×1-in footprint. This next-generation product greatly improves the “cost/performance” ratio in the 30-W, 1×1-in industry standard product area. Combined with safety approvals to the latest IEC/EN/UL 62368-1 standards, the product is a candidate for mobile equipment, instrumentation, distributed power architectures and industrial […]
15-W high-density dc-dc converters come in DIP-16 footprint.
TRACO POWER announces the release of four new families of 15-watt high-density DC-DC converters in the DIP-16 footprint. These 4 families allow choices for 2:1 or 4:1 input ranges with or without an integral heatsink-case design. These four families are: TEL 15N (2:1 Input range); TEL 15N-HS (2:1 input with heatsink); TEL 15WIN (4:1 input); […]
Compact unregulated 3-W dc/dc converters target industrial applications
The TMU 3 series consists of a set of isolated 3-W dc/dc converters with unregulated outputs in a standard SIP-4 package. They are designed to offer a compact low-cost alternative to regulated series with no concession on quality and lifetime. They feature a continuous short circuit protection circuit, I/O-isolation of 1,500 Vdc and an operating […]
DC/DC 2-W converters come in compact SIP-9 package
TRACO POWER announces their new TRV 2M series of 2 Watt DC/DC in the compact SIP-9 package with reinforced isolation of 5000 VAC for medical and industrial applications. This series is designed to protect any connected interfaces or applied parts to patients with 2XMOPP compliance. The TMR 2M consists of 21 models offering 1.5:1 input […]
