Standex Electronics has announced the enhanced capacity of its U Series of High-Frequency Density Reed Relays, manufactured by its renowned Sanyu 3U Brand from Japan. This series is designed to meet the growing demands for miniaturization and high-frequency performance in applications such as Automated Test Equipment (ATE), telecommunications, and wireless markets. The U Series is […]
Telecommunications
Isolated power module delivers 500 W output with parallel scaling to 3 kW
GAIA Converter has expanded its MGDM-500 series with the introduction of the MGDM-500/P isolated dc-dc converter. The new module converts input voltages of 9-40 Vdc or 16-80 Vdc to four nominal DC output voltage options: 12V, 15V, 24V, and 28V. The unit delivers up to 500 watts of output power at an efficiency of 91%. The […]
Quarter-brick modules convert 48 V rack power to 12 V output for computing applications
OmniOn Power has developed a new family of high-power, non-isolated dc-dc bus converters for applications including AI, large language models, and machine learning. The Osprey family includes three modules: the 2-kilowatt QODE167A0B, 1.6kW QODE136A0B, and 1.3kW QODE108A0B. The converters utilize the DOSA standard quarter-brick footprint. The Osprey bus converters operate with a 40-60 V DC […]
Power IC meets ASIL D safety level
The OPTIREG Power Management IC (PMIC) portfolio enables highly efficient voltage regulation, offering pre-and post-regulator architectures with DC/DC and linear regulators as well as trackers. In addition to the power supply, additional monitoring and control functions are integrated, enabling customers to develop automotive ECUs for safety-related applications. To further support developers, Infineon Technologies AG is […]
Chip resistors handle -55°C to +150°C range
KYOCERA AVX expanded its selection of CR Series high-power chip resistors with the addition of the industry’s highest-power 0603 resistors. CR Series high-power chip resistors are non-magnetic, RoHS compliant, qualified to MIL-PRF-55342, manufactured in ISO-9001 facilities, and proven to deliver high-reliability performance in a wide range of high-power and high-frequency applications. The new high-power 0603 […]
AEC-Q100-qualified fixed-direction level translators operate at 250 Mbps
Nexperia released a new family of next-generation fixed-direction voltage level translators ideal for use with some of the most commonly used push-pull data interfaces (including UART, SPI, and JTAG protocols) as well as for general-purpose input/output (GPIO). The NXU series of 4-bit, 2-bit, and 1-bit dual-supply buffers offer a smaller, higher performance and lower-cost level […]
Flat-wire construction yields low-profile inductors
Bourns, Inc. released its Model SRP-F Series shielded power inductors. The nine models in the series feature low DCR with flat wire construction in a small, low-profile (0.7 to 1.0 mm) form factor. The flat wire construction improves the efficiency of these new power inductors by significantly reducing DCR compared to other similarly sized power inductor devices […]
Solid-state relay switches 100 V in 0.1 ms
Vishay Intertechnology, Inc. introduced the industry’s first 1 Form A solid-state relay to offer AEC-Q102 qualification and a 100 V load voltage. Offered in the low profile SOP-4 package, the Vishay Semiconductors VORA1010M4 delivers the industry’s fastest turn-on and turn-off times of 0.1 ms typical, in addition to the highest operating temperature of +125 °C. […]
Sink controllers request and control USB-C power
Diodes Incorporated releases two USB Type-C Power Delivery (PD) 3.1 extended power range (EPR) sink controllers. These can be embedded into battery-powered devices and other types of equipment using a USB Type-C socket as a power source, including routers, wireless speakers, power banks, and power tools. The AP33771C and AP33772S support product designers transitioning from proprietary charging ports, […]
Transformer drivers enable compact, low-noise isolated power supplies
Nexperia introduced the NXF6501-Q100, NXF6505A-Q100, and NXF6505B-Q100. These are AEC-Q100 qualified, push-pull transformer drivers that enable the design of small, low-noise, and low-EMI isolated power supplies for a range of automotive applications like traction inverters and motor control, DC-DC converters, battery management systems and on-board chargers in electric vehicles (EV). These transformer drivers are also […]
