EPC announces the availability of the EPC9145, a 1 kW, 3-phase BLDC motor drive inverter using the EPC2206 eGaN FET. The EPC9145 demonstration board is a 3-phase BLDC motor drive inverter board featuring the 2.2 mΩ maximum RDS(on), 80 V maximum device voltage EPC2206 eGaN FET. This board is tailored to e-bikes, eMotion, drones, and […]
Robotics
1.5kW ac-dc power supplies offer CV and CC operation
Two new single-phase 1.5kW AC-DC power supplies from XP Power offer programmable constant voltage (CV) and constant current (CC) operation with analog and digital interfaces for user control. The compact and convenient solutions use an efficient resonant zero-volt switching (ZVS) topology and are suitable for equipment manufacturers in a wide range of industries including industrial, […]
Battery management system targets robotics, AGV, 2/3-wheeler apps
The new i-BMS Battery Management System from Lithium Balance, acquired by Sensata earlier in the year, is a cell chemistry agnostic, compact, integrated BMS developed for the cost-optimized mass-production of applications up to 60 V, such as two and three-wheelers, automated guided vehicles (AGVs), and robotics. The i-BMS is a long-term solution for customers who […]
Servo drive boards provide 100 A peak current
Now joining the Advanced Motion Controls FlexPro family are the first of their “Mini”-sized servo drives. With a slight size increase, these drives can output over double the current and operate on a higher voltage than existing micro-sized FlexPro drives. The Mini Size FlexPro drives boast a continuous current rating of 50 amps and a […]
Tiny eGaN FETs target BLDC motor drives, Lidar apps
EPC advances the performance capability while lowering the cost for off-the-shelf gallium nitride transistors with the introduction of EPC2065 and EPC2054. The EPC2065 is an 80 V, 3.6 mΩ, 221 Apulsed eGaN FET in a 7.1 mm2 chip-scale package. The small size and superior efficiency reduce overall power system size and weight and make it […]
GaN transistors, ICs feature radiation hardening
EPC announces the introduction of a new family of radiation-hardened gallium nitride transistors and integrated circuits. With higher breakdown strength, faster-switching speed, higher thermal conductivity, and lower on-resistance, power devices based on GaN significantly outperform silicon-based devices. The lower resistance and gate charge enable faster power supply switching frequencies resulting in higher power densities, higher […]
Servo driver reference design speeds electronic robotic gripper development
TRINAMIC Motion Control GmbH & Co. KG, now part of Maxim Integrated Products, Inc. introduces an open-source, fully integrated reference design that simplifies the development of industrial robotic end-of-arm tooling (EoAT). The TMCM-1617-GRIP-REF reference design integrates hardware-based field-oriented control (FOC) and three communication ports to shrink the design size of electronic robotic grippers by three […]
Modular power supplies feature adjustable outputs to 30 V
Vox Power has introduced two new 300W output modules for use with their NEVO+600 and NEVO+1200 series modular power supplies. These very high-reliability output modules are ideal for industrial, machine building, Industry 4.0, robotics, and ITE applications. Requiring two slots on the NEVO+ configurable chassis the OPA2 and OPA3 modules provide field configurable, manually adjustable […]
Reference design details GaN-based 3-kW LLC resonant converter
GaN Systems introduced a new reference design for a high density, high efficiency GaN-based 3kW LLC Resonant Converter (GS-EVB-LLC-3KW-GS) aimed to reduce design cycles, costs, and time to market for companies developing data center, telecom, and industrial switching mode power supply (SMPS) applications. The full-bridge LLC resonant converter design, integrating GaN Systems’ 650 V E-mode transistors, exceeds the […]
Demo board powers 400-W BLDC motors with GaN
EPC announces the availability of the EPC9146, a 400 W motor drive demonstration. The EPC9146 power board contains three independently controlled half-bridge circuits, featuring the EPC2152 monolithic ePower Stage with integrated gate driver, 80 V maximum device voltage, 15 A (10 ARMS) maximum output current. The inverter board measures just 81 mm x 75 mm […]