Many types of electronic devices now benefit from the higher reliability of automotive grade resistors. By specifying automotive grade resistors, design engineers in any market segment can increase electrical stability and environmental reliability without the significant increase in cost normally associated with established reliability resistors. Stackpole’s RMCA series is AEC Q200 qualified and provides excellent long-term reliability. The […]
Industrial
Three-phase filter series designed for industrial an renewable energy use
The MF423-4-3D-BS Three Phase EMI Filter Series from EMIS is designed to effectively reduce electrical noise and ensure a clean power supply across various applications, including renewable energy systems and industrial machinery. This dual-stage EMI filter offers high attenuation for both line-to-ground and line-to-line emissions, enhancing system reliability and conducted immunity when connected to the […]
Power device line expanded to include ideal diodes with low forward voltage drop
Nexperia announced the addition of two new ideal diode ICs to its continuously growing portfolio of power devices. The NID5100 is suitable for standard industrial and consumer applications while the NID5100-Q100 has been qualified for use in automotive applications. Ideal diodes are MOSFET based devices that offer much lower forward voltage drop than traditional diodes […]
How do SiC and GaN devices age?
By Peter Friedrichs, Infineon Technologies SiC and GaN devices operate at higher stress levels than silicon devices. The semiconductor and automotive industries have strict qualification tests for that. Silicon carbide (SiC) and gallium nitride (GaN) wide bandgap (WBG) technologies are well known for their performance advantages over silicon (Si) in many high-power areas, including their […]
Centralized LED drivers simplify large-scale lighting installations
Advanced Energy Industries, Inc. has announced the LumaDrive Pre-wired Systems series of high-efficiency remote centralized drivers for large-scale horticultural, greenhouse, and industrial LED lighting applications. These platforms combine multiple 4 kW modules into a cost-effective pre-wired cabinet that simplifies installation, enables simple “hot swap” repairs, eliminates extra dimming control connections, and reduces the overall cost […]
Power device portfolio expanded with low-Ohmic, high-current eFuse
Nexperia announced the NPS3102A and NPS3102B electronic fuses (eFuses) as the latest additions to its ever-expanding power device portfolio. These low-ohmic (17 mΩ), high current (13.5 A), and resettable electronic fuses help to protect downstream loads from exposure to excessive voltages while also protecting power supplies from load faults and large inrush currents. These eFuses […]
AC-DC power supplies deliver 3 V to 48 V over wide input voltage range
XP Power introduces the EHL series of PCB mount AC-DC power supplies that deliver single output voltages ranging from 3.3VDC to 48VDC. Available in both open-frame and encapsulated mechanical formats, the EHL05 (5W) and EHL20 (20W) high-power density power supplies feature an ultra-wide input range of 85VAC to 528VAC for global compatibility and high stability during fluctuating power conditions. […]
Non-isolated dc-dc converters with enhanced environmental protection
TDK Corporation announces the introduction of the 400 to 750W rated RGB series of ruggedized non-isolated DC-DC converters from TDK-Lambda. These converters operate from input voltages of 9 to 18V, 18 to 32V, or 18 to 60V and can deliver output voltages adjustable from 0.8 to 8V or 3.3 to 24V with output currents of […]
Magnetic packaging modules boost power density and efficiency
Texas Instruments (TI) introduced six new power modules aimed at enhancing power density, efficiency, and EMI reduction. These modules utilize TI’s MagPack integrated magnetic packaging technology, reducing size by up to 23% compared to competitors. These power modules leverage TI’s proprietary MagPack integrated magnetic packaging technology, shrinking their size by up to 23% compared to […]
Modules boost power density for point-of-load applications
OmniOn Power has introduced new FPLX-series dc-dc converters to its DLynx III family of non-isolated point-of-load (POL) modules. The new FPLX015 (15-amp), FPLX020 (20A), and FPLX030 (30A) modules feature 10 mm by 10 mm footprints and provide power densities of 97 A/in2, 129 A/in2, and 194 A/in2, respectively. The common footprint across all three modules offers […]
