New 2 to 7 W/m-K dispensable thermal interface gap fillers are dispensable are dispensable thermal interface materials suitable for many types of applications, including thin bond line and gap filler applications. Both silicone and non-silicone options are available as well as one-part and two-part options. Various types of dispensing systems range from low-cost approaches for […]
Power Components
Three-phase gate drivers geared for EVs and hybrids
Allegro MicroSystems, Inc. is expanding its QuietMotion product line with the introduction of the new A89307 automotive-qualified gate driver integrated circuit (IC). Designed for battery cooling fans and HVAC systems in electric (EV) and hybrid vehicles, the A89307 offers ultra-low noise and vibration by using a Field Oriented Control (FOC) algorithm to drive continuous sinusoidal current […]
Inductors target power-over-coax automotive apps
TDK Corporation announces the release of its newly developed ADL3225VM inductors for use in automotive Power over Coax (PoC) systems. Measuring at 3.2 x 2.5 x 2.5 mm (L xW x H), these inductors provide a compact solution for designers looking to reduce vehicle weight as manufacturers add more sensors and cameras to accommodate expanding […]
Reed relays handle continuous carry currents to 3A
Pickering Electronics has launched the Series 100 HC high power SIL/SIP reed relay that is rated for 1A switching at up to 40W and up to 3A continuous carry current. Featuring the highest quality instrumentation-grade switches with sputtered ruthenium contacts, Series 100 HC relays are suitable for low-level or ‘dry’ switching applications. Series 100 […]
Putting supercapacitors to work
There are a variety of modern applications in which supercapacitors are better candidates than either batteries or ordinary capacitors. George Wundsam, Cornell Dubilier Supercapacitors are not new. First developed in the 1950s, commercial versions were marketed over 40 years ago. At that time, supercapacitors were certainly not on a fast track to practical application. They […]
IEDM: Mating GaN with CMOS
Gallium nitride (GaN) is a promising material for RF/mmWave and power applications because of its ability to operate at higher voltages and frequencies than silicon while exhibiting lower losses. The integration of GaN technology with CMOS technology, especially if built using mainstream silicon CMOS tools and fabrication processes, could usher in inexpensive next-generation PC/mobile devices […]
TVS array protects circuits in common computer interfaces
Protect Devices has introduced a steering diode/transient voltage suppressor array (TVS array) for circuit protection in common computing interfaces like HDMI and DVI, USB, SATA and PCIe, and more. It provides an ultra-low capacitance of 0.3pF, typical for I/O to ground. The new device part number is the PLR0504FN5. It is compatible with the IEC […]
LED driver with 4.5-75-V input designed for auto/industrial/med apps
Taiwan Semiconductor announces the introduction of the TS19503 single-channel, continuous conduction, hysteretic mode converter for driving single or multiple LEDs. Featuring best-in-class 4.5-75V input and 2A output, the TS19503 offers up to 97% efficiency and 2% accuracy over a wide range of external conditions. AEC-Q100 qualification assures high reliability while the hysteretic (bang-bang) control technique […]
Automotive wireless charging reference design is Qi 1.3-certified
NXP Semiconductors announced a new automotive wireless charging reference design, the first to be certified by the Wireless Power Consortium (WPC), the global standard development body for wireless power, for its new Qi 1.3 standard. The reference design consists of a Qi-certified board with an NXP wireless charging MWCT family MCUs, as well as an […]
ESD protection devices ensure signal integrity for USB4
Nexperia announced two PESD5V0R1BxSF extremely low clamping and capacitance bidirectional Electrostatic Discharge (ESD) protection diodes. Based on Nexperia’s TrEOS technology with active silicon-controlled rectification, the devices ensure optimal signal integrity for USB4 (up to 2 x 20 Gbps) data lines on laptops and peripherals, smartphones, and other portable electronic equipment. The PESD5V0R1BDSF is optimized for low clamping […]